Abstract:Abstract In the last two years, three major technical improvements have been made on J-TEXT in supporting of the expanded operation regions and diagnostic capabilities. (1) The successful commission of the 105 GHz/500 kW/1 s electron cyclotron resonance heating (ECRH) system increasing the core electron temperature from 0.9 keV up to around 1.5 keV. (2) The poloidal divertor configuration with an X -point in the high-field side has been achieved. In particular, the 400 kW electron cyclotron wave has also been successfully injected into the diverted plasma. (3) A 256-channel electron cyclotron emission imaging diagnostic system and two sets of four-channel Doppler backscattering diagnostics have been successfully developed on J-TEXT, allowing detailed measurement of the electron temperature and density fluctuations for turbulence and MHD research. The locked mode (LM), especially the 2/1 LM, is one of the biggest threats to the plasma operation. Both the thresholds of 2/1 and 3/1 LM are observed to vary non-monotonically on electron density. The electrode biasing was applied successfully to unlock the LM from either a rotating or static resonant magnetic perturbation (RMP) field. In the presence of 2/1 LM, three kinds of standing wave (SW) structures have been observed to share a similar connection to the island structure, i.e. the nodes of the SWs locate around the O - or X -points of the 2/1 island. The control and mitigation of disruption is essential to the safe operation of ITER, and it has been systematically studied by applying a RMP field, massive gas injection (MGI) and shattered pellet injection on J-TEXT. When the RMP-induced 2/1 LM is larger than a critical width, the MGI shutdown process can be significantly influenced. If the phase difference between the O -point of LM and the MGI valve is +90° (or −90°), the penetration depth and the assimilation of impurities can be enhanced (or suppressed) during the pre-thermal quench (TQ) phase and result in a faster (or slower) TQ. A secondary MGI can also suppress the runaway electron (RE) generation, if the additional high-Z impurity gas arrives at the plasma edge before TQ. When the secondary MGI has been applied after the formation of the RE current plateau, the RE current can be dissipated, and the dissipation rate increases with the injected impurity quantity but saturates with a maximum of 28 MA s −1 . The non-local transport is experimentally observed in the ion transport channel. The electron thermal diffusivity significantly increases with the ECRH power. Theoretical work shows that significant intrinsic current can be driven by electromagnetic turbulence, and the robust formation mechanism of the E × B staircase is identified from the Hasegawa–Wakatani system.

Summary of the 11th Conference on Magnetic Confined Fusion Theory and Simulation (CMCFTS 2023)

Summary of the 11th Conference on Magnetic Confined Fusion Theory and Simulation

Overview of Experimental Results on the HL-2A Tokamak

Summary of the 10th Conference on Magnetically Confined Fusion Theory and Simulation（CMCFTS）

Recent Progress in Chinese Fusion Research Based on Superconducting Tokamak Configuration

Advanced Simulation of Electron Heat Transport in Fusion Plasmas

Summary of presentations reported in EXperiment Confinement (EX-C) session at the 29th IAEA Fusion Energy Conference

Summary of the Theory and Modeling contributions at the 29th IAEA Fusion Energy Conference (FEC 2023)

A Long-Pulse Small Edge-Localized-mode High-Confinement Plasma with Detachment Feedback Control by Floating Potential in an Experimental Advanced Superconducting Tokamak in a Metal Wall Environment

MHD analysis on the physical designs of CFETR and HFRC

Optimizations of CFETR Steady State H-mode Scenario with Localized Reversed Shear Enhanced Internal Transport Barrier

Advances in physics and applications of 3D magnetic perturbations on the J-TEXT tokamak

MHD Simulations on Magnetic Compression of Field Reversed Configurations

Advances in Physics Understanding of High Poloidal Beta Regime Toward Steady-State Operation of CFETR

Overview of Improved Confinement and Plasma Control in the MST Reversed Field Pinch

The Simulation of the Application of Quasi-Snowflake Magnetic Configuration on the EAST New Lower Tungsten Divertor

Study of the influence of magnetic shear on the linear MHD instabilities in the pedestal of elongated divertor configurations using CLT code

Progress of Physics Understanding for Long Pulse High-Performance Plasmas on EAST Towards the Steady-State Operation of ITER and CFETR

Overview of Experimental Results and Code Validation Activities at Alcator C-Mod

Modeling of the merging of two colliding field reversed configuration plasmoids

Progress of Divertor Heat and Particle Flux Control in EAST for Advanced Steady-State Operation in the Last 10 Years