Abstract:Uncertainty in the figure of merit (FOM) parameters is a central feature of the best-estimate plus uncertainty (BEPU) method, which provides insight into the analysis margins not available from other analysis methods. The FOM uncertainty distributions are formed from propagation of the variations and uncertainty distributions in the operational and modeling parameters used in simulations of a design-basis accident (DBA) scenario for a nuclear power plant. To compute an accurate FOM uncertainty distribution, it is critical to accurately quantify and account for the input parameter prediction uncertainties. The coolant flow rate through fuel channels, or more precisely, the hydraulic resistance, including the impact of two-phase flow and its distribution in the primary heat transport system and the critical heat flux (CHF) of the fuel, are two key parameters for the limiting postulated accident scenarios in a CANDU reactor for various DBAs. Prediction uncertainty distributions for these parameters can be derived by directly validating code predictions against in-reactor measurements of flow rate and experimental measurements of CHF, respectively. Such code validation circumvents the convoluted and complex approach of decomposing computer models of physical phenomena into microscopic parameters, such as interfacial mass, momentum, and heat transfer correlations, and propagation of their uncertainty distributions to obtain an overall parameter uncertainty distribution of interest. Uncertainties associated with predictions of the coolant flow rate and CHF arise due to temporal and spatial variations and uncertainties in reactor conditions, limitations of physical models and their implementation in the codes, and in the case of CHF, measurement uncertainties associated with full-scale experiments. Careful assessment of key uncertainties, specifically their magnitudes, is important for ensuring uncertainty magnitudes are not unnecessarily over- or underestimated. These uncertainties also need to be characterized properly, e.g., whether uncertainties are common to a group of reactor fuel channels or vary independently for each fuel channel. Inadequate identification or incorrect classification or characterization of uncertainties would result in an inaccurate FOM uncertainty distribution. One important focus area for this study is the distinction between apparent prediction uncertainty (the difference between code prediction and measurement) and actual prediction uncertainty (the difference between code prediction and the true value). The actual code prediction uncertainty can be calculated from the apparent code uncertainty, provided there is adequate knowledge about the measurement uncertainty. The uncertainty models developed using this approach will be used as part of the BEPU analysis for slow loss-of–reactor power regulation accidents.

Uncertainty Analysis of Neutronic/thermal-Hydraulic Coupling in Pressurized Water Reactor Fuel Assemblies

Research on Coupling of Neutronics and Thermal-Hydraulics Based on Stochastic Method of Neutron Transport

Uncertainty Analysis of Advanced Pressurized Water Reactor Fuel Assembly

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Engineering Uncertainty Analysis of the Heat Transfer of Fuel Plates

Quantification of Control Rod Worth Uncertainties Propagated from Nuclear Data Via a Hybrid High-Order Perturbation and Efficient Sampling Method

Uncertainty Quantification of Engineering Parameters for a Nuclear Reactor Loaded with Dispersed Fuel Particles

Generalized Perturbation Theory Based Total Sensitivity and Uncertainty Analysis for High-Fidelity Neutronics Calculation

An Method to Quantify Control Rod Worth Uncertainty Propagated from Nuclear Data

Development and uncertainty analysis of the dynamic simulation for HFETR with BMUS framework

Challenges and Progress of Uncertainty Analysis for the Pebble-Bed High-Temperature Gas-Cooled Reactor

Thermal-fluid-structure Coupling Analysis for Plate-Type Fuel Assembly under Irradiation. Part-I Numerical Methodology

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

Derivation of Uncertainty Distributions for Channel Flow Rate and Fuel Critical Heat Flux Predictions for Best-Estimate Plus Uncertainty Analysis of Slow Loss-of–Reactor Power Regulation Accidents in CANDU Stations

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Development of Statistical Thermal Design Procedure to Evaluate Engineering Uncertainty of Super LWR

Uncertainty Analysis of Containment Dose Rate for Core Damage Assessment in Nuclear Power Plants

Simulation of Single-Phase Natural Circulation within the BEPU Framework: Sketching Scaling Uncertainty Principle by Multi-Scale CFD Approaches

Study on the Prediction of DNB-Type Critical Heat Flux in Rod Bundle Under Motion Conditions

Investigation on Rod Bundle CHF Mechanistic Model for DNB and DO Prediction Under Wide Parameter Range

A new neutronics-thermal-mechanics multi-physics coupling method for heat pipe cooled reactor based on RMC and OpenFOAM