Abstract:High efficiency and environment-friendly elastocaloric solid-state cooling has emerged as a promising alternative to traditional vapor-compression refrigeration. Owing to the high entropy change during martensite transformation, NiTi shape memory alloy (SMA) is a competitive candidate for the core components of solid-state refrigeration systems. However, main bottlenecks for the development of NiTi SMA based refrigeration systems are their relatively low elastocaloric strength and the requirement of high driving force. In this work, the elastocaloric effect of NiTi SMA helical springs with three geometrical configurations are investigated experimentally at first. It is found that the elastocaloric performance can be tailored by changing the spring geometrical parameters and the magnitude of applied load. Giant cooling temperature of 12.5K and elastocaloric strength of 0.31K/MPa are observed for the helical spring with a spring index of 7.7 under an ultra-low tensile driving force of 71 N. The elastocaloric strength reported in this work is ten times larger than that observed in the NiTi wires, rods, tubes, sheets and films subjected to a tensile or compressive loading, and twice larger than that in the NiTi wires under a bending deformation mode. Then, a three-dimensional (3D) thermodynamic-consistent constitutive model within the finite strain framework and considering the thermo-mechanical coupling effect is developed. The proposed model is further implemented into the finite element program ABAQUS by writing a user-defined material subroutine (UMAT). Finally, simplified analytical relations among the cooling temperature, maximum driving force, geometrical parameters of the springs and applied displacement are derived. Comparing the predictions with the experimental data, it is found that the influences of geometrical parameters and loading level on the elastocaloric strength of NiTi SMA helical spring can be well captured by both the finite element analysis and proposed analytical relation. This work shows a potential for developing the cooling technology with high elastocaloric strength and low driving force, and provides a theoretical guidance to design and assess the cooling device manufactured by SMA spring.

Data-driven High Elastocaloric NiMn-based Shape Memory Alloy Optimization with Machine Learning

Machine-Learning-Driven Design of High-Elastocaloric NiTi-Based Shape Memory Alloys

Thermomechanical response and elastocaloric effect of shape memory alloy wires

Improvement of Mechanical Properties and Elastocaloric Effect in Ag Doped Ni-Mn-In Magnetic Shape Memory Alloys

Giant Elastocaloric Effect Induced by Lower Stress in Ni-Mn-In-Fe Ferromagnetic Shape Memory Alloys

Large tunable elastocaloric effect in additively manufactured Ni–Ti shape memory alloys

Modeling the Anisotropic Elastocaloric Effect of Textured NiMnGa Ferromagnetic Shape Memory Alloys

Elastocaloric Cooling of Additive Manufactured Shape Memory Alloys with Large Latent Heat

Improved Elastocaloric Effect of NiTi Shape Memory Alloys Strengthened by Ni4Ti3 Nanoprecipitates

Large Elastocaloric Effect in a Ni–Co–Mn–Sn Magnetic Shape Memory Alloy

Data-driven shape memory alloy discovery using Artificial Intelligence Materials Selection (AIMS) framework

Enhanced elastocaloric effect and specific adiabatic temperature variation in Ni-Mn-In-Si-Cu shape memory alloys

An Informatics Approach to Transformation Temperatures of Niti-Based Shape Memory Alloys

Screening for shape memory alloys with narrow thermal hysteresis using combined XGBoost and DFT calculation

Elastocaloric Effect and Magnetic Properties of Ni 50 Mn 31.5 Ti 18 Cu 0.5 Shape Memory Alloy

Toughening of Ni-Mn-Based Polycrystalline Ferromagnetic Shape Memory Alloys

Noise‐Aware Active Learning to Develop High‐Temperature Shape Memory Alloys with Large Latent Heat

Solid-state cooling with high elastocaloric strength and low driving force via NiTi shape memory alloy helical springs: Experiment and theoretical model

Elastocaloric Cooling of Shape Memory Alloys: A Review

Giant and Reversible Room-Temperature Elastocaloric Effect in A Single-Crystalline Ni-Fe-Ga Magnetic Shape Memory Alloy

Multicaloric effect in Ni–Mn–Sn metamagnetic shape memory alloys by laser powder bed fusion