Abstract:In recent years,heat pipe has been widely used as an efficient heat transfer equipment in fuel chemistry,electronic communication and so on.The main structure of a heat pipe mainly includes the vacuum tube containing alkali metal working fluid and the composite mesh wick on the inner wall of the tube.In the axial direction,heat pipes are generally divided into three parts:evaporation section,adiabatic section and conden-sation section.Heat is input into the heat pipe through the evaporation section and output through the condensation section.The adiabatic section only plays a role in connecting and mass transfer.The length of each area can be flexibly arranged.In the radial direction,heat pipes are generally divided into outer wall surface,wick and vapor area.Alkali metal high-temperature heat pipes show broad application prospects in the nuclear reactor cooling and other aspects because of their strong heat transfer capacity and inherent safety at high temperature.Because the working fluid of these heat pipes is solid at room temperature,and whose saturated vapor pressure relatively low,their frozen start-up has a complex phase change process of the working fluid,so it brings some difficulties to the study of the frozen start-up of the high-temperature heat pipes.For different application scenarios,it is necessary to study the transient and steady-state operating characteristics of high-temperature heat pipes,to provide support for the application of high-temperature heat pipes in a variety of applicable scenarios.To estab-lish a method for predicting the transient start-up and steady-state operation characteris-tics of alkali metal high-temperature heat pipes,this study utilized the finite volume method(FVM)to establish the pipe wall heat conduction model,the wick flow heat transfer model,and the vapor zone model.A frozen start-up transient analysis program for alkali metal high-temperature heat pipes was developed and verified using the C programming language,with a maximum relative deviation of 9.8％.Transient start-up of a single horizontal sodium heat pipe was simulated,and sensitivity analysis was conducted.The steam zone of the heat pipe enters the continuous flow state completely 700 seconds after start-up,and after a total of 3 000 seconds,the heat pipe reaches steady-state operation.Under steady-state operation,the heat pipe exhibits good iso-thermal properties,with a stable axial temperature difference of 22.5 K on the outer wall and an internal pressure drop of approximately 47 Pa in the wick.Furthermore,the ambient temperature primarily impacts the time required for the heat pipe to reach stead-y-state,as well as the vapor pressure and velocity distribution under steady-state condi-tions.Meanwhile,the length of the adiabatic section of the heat pipe influences the time required for it to reach steady-state and has a significant effect on the pressure and velocity distribution of the wick.

Investigation of Improved VOF Method in CFD Simulation of Sodium Heat Pipes Using a Multi-Zone Modeling Method

Numerical modeling of alkali metal heat pipes

An Improved Model of the Heat Pipe Based on the Network Method Applied on a Heat Pipe Cooled Reactor

CFD Analysis on the Multiphase Flow of the Wickless Sodium Heat Pipe with Non-condensable Gas

Operation characteristics analysis of high temperature alkali metal heat pipe based on OpenFOAM

Numerical Investigation of High-Temperature Heat Pipes with Different Wick Structures under Non-Uniform Heating Boundary Conditions

Numerical Simulation of a Small High-Temperature Heat Pipe Cooled Reactor with CFD Methodology

Numerical simulation analysis of high-temperature bent sodium heat pipes

CFD simulation based on film model of high temperature potassium heat pipe at different positions: Horizontal, vertical, and 45° inclined

Three-dimensional CFD simulation of geyser boiling in high-temperature sodium heat pipe

Modeling and Analysis of Two-Phase Distribution in Large-Scale Separate Heat Pipe

Modeling and numerical investigation on the effects of filling ratio in a large separate heat pipe loop

Numerical Study on Flow and Heat Transfer of Alkali Metal High-temperature Heat Pipe during Frozen Startup Based on FVM

Single/multi-objective optimization and comparative analysis of liquid-metal heat pipe

Numerical investigation on thermal behavior of high temperature heat pipe based on thermal resistance network model

Numerical Investigation on the Geyser Boiling in High Temperature Wick Sodium Heat Pipe Based on CFD Method

Experimental investigation of flow visualization and thermal performance of flat-plate single-loop pulsating heat pipes

Experimental and numerical simulation study of sodium heat pipe with large aspect ratio

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Molecular dynamics study of liquid sodium film evaporation and condensation by Lennard-Jones potential

Transient Study on Heat Transfer and Flow Performance of Alkali Metal Heat Pipe in Space Nuclear Powered Heat Pipe Radiator