Abstract:The hydrogen evolution reaction (HER) is one of the most promising methods of obtaining high-purity hydrogen. However, the high cost and limited resources of materials with low cathodic hydrogen evolution overvoltage values, such as platinum group metals, are the main obstacles to the use HER for obtaining hydrogen on an industrial scale. Therefore, it is necessary to develop new alternative materials and methods of their production. One of the promising materials are catalysts based on refractory metals, in particular tungsten carbides. Metal tungsten can also be used for these purposes. In our opinion, high-temperature electrochemical synthesis (HTES) in molten salts can be a promising method of obtaining materials with properties that meet the requirements for effective catalysts, namely: ultra-dispersity, high specific surface area, mesoporosity and defective structure, high chemical and electrochemical stability. Therefore, the purpose of this work is to evaluate the electrocatalytic activity of a group of materials for HER, which are obtained by HTES in melts. Four samples of electrolytic materials were chosen for the study: tungsten, carbon, tungsten mono- and semi-carbides (WC and W2С). All samples were characterized in detail using X-ray diffraction (phase composition), SEM (morphology), Raman spectroscopy (structure of carbon phases), DTG (free carbon content). Based on the analysis of the obtained data, it was established that all samples can be used as catalysts: crystallites have a nanometer size and a large number of structural defects; morphology provides increased surface area; tungsten carbide particles are covered with a layer of free carbon, which prevents oxidation of carbide to WO3, which has a lower catalytic activity; carbon particles are nanosized (20–30 nm) and contain a large number of structural defects; tungsten carbide-based samples contain free carbon, which increases the specific surface area, but does not cause clogging of pores. Polarization measurements were carried out at room temperature at a polarization rate of 5 mV/s in a standard three-electrode cell with an Ag|AgCl reference electrode. 1N H2SO4 was used as a base solution, which was bubbled with high-purity argon. Onset potentials for all samples are -0.05 – -0.25 V (in order WC/C – W2C/WC/C – C – W). The overvoltage and Tafel slope were calculated and WC/C composite was shown to have the lowest values of -0.2 V and -75 mV, respectively. Electrolytic composite of tungsten carbide/carbon have demonstrated the best characteristics, so we plan to continue the development of synthesis method of carbide compounds, which will allow us to reveal even greater potential of carbide catalysts and pave the way for their wide application in catalytic processes.

Rapid Synthesis of Phase-Engineered Tungsten Carbide Electrocatalysts via Flash Joule Heating for High-Current-Density Hydrogen Evolution

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

Electrodeposited NiFeCoMoW High-Entropy Alloys with Nanoscale Amorphous Structure As Effective Hydrogen Evolution Electrocatalysts

Platinum Single-Atom and Cluster Anchored on Functionalized MWCNTs with Ultrahigh Mass Efficiency for Electrocatalytic Hydrogen Evolution

Transient synthesis of carbon-supported high-entropy alloy sulfide nanoparticles via flash Joule heating for efficient electrocatalytic hydrogen evolution

Ultrafast Synthesis of Mo2C-Based Catalyst by Joule Heating towards Electrocatalytic Hydrogen Evolution Reaction

Ultrafast self-heating synthesis of robust heterogeneous nanocarbides for high current density hydrogen evolution reaction

Phase-pure Ditungsten Carbide Nanoparticles Covered by Carbon As Efficient Electrocatalysts for Hydrogen Evolution Reaction

Eutectoid-structured WC/W2C Heterostructures: A New Platform for Long-Term Alkaline Hydrogen Evolution Reaction at Low Overpotentials

High-temperature shock enabled synthesis of ultrafine Ru nanoparticles anchoring onto tungsten carbide with strong metal-support interaction for ampere-level current density hydrogen evolution

Ditungsten carbide nanoparticles homogeneously embedded in carbon nanofibers for efficient hydrogen production

Facile Fabrication of Robust Hydrogen Evolution Electrodes under High Current Densities via Pt@Cu Interactions

Tungsten-Assisted Phase Tuning of Molybdenum Carbide for Efficient Electrocatalytic Hydrogen Evolution

W2C Nanodot-Decorated CNT Networks As a Highly Efficient and Stable Electrocatalyst for Hydrogen Evolution in Acidic and Alkaline Media

Encapsulating Dual-Phased Mo2c-Wc Nanocrystals Into Ultrathin Carbon Nanosheet Assemblies For Efficient Electrocatalytic Hydrogen Evolution

Rapid High-Temperature Liquid Shock Synthesis of High-Entropy Alloys for Hydrogen Evolution Reaction.

Scalable Synthesis of Heterogeneous W–W2C Nanoparticle-Embedded CNT Networks for Boosted Hydrogen Evolution Reaction in Both Acidic and Alkaline Media

ELECTROLYTIC CATALYSTS BASED ON TUNGSTEN AND CARBON COMPOUNDS FOR THE HYDROGEN EVOLUTION REACTION

Fabrication Of C/Co-Fes2/Cos2 With Highly Efficient Hydrogen Evolution Reaction

Porous Tungsten Carbo-Nitride Supported Pt Nanoparticles with High Conductivity for Efficient and Stable Hydrogen Evolution Reaction

Self-supported Porous Heterostructure WC/WO3−x Ceramic Electrode for Hydrogen Evolution Reaction in Acidic and Alkaline Media