Abstract:Purpose - The motivation for this work is to establish a model that not only includes the main factors resulting in macrosegregation but also retains simplicity and consistency for the sake of potential application in casting practice.Design/methodology/approach - A mathematical model for the numerical simulation of thermosolutal convection and macrosegregation in the solidification of multicomponent alloys is developed, in which the coupled macroscopic mass, momentum, energy and species conservation equations are solved. The conservation equations are discretized by using the control volume-based finite difference method, in which an up-wind scheme is adopted to deal with the convection term. The alternative direction implicit procedure and a line-by-line solver, based on the tri-diagonal matrix algorithm, are employed to iteratively solve the algebraic equations. The velocity-pressure coupling is handled by using the SIMPLE algorithm.Findings - Based on the present study, the liquid flow near the dendritic front is believed to play an important role in large-scale transport of the solute species. The numerical or experimental results in the literatures on the formation of channel segregation, especially those about the location of the initial flow as well as the morphology of the liquidus front, are well supported by the present investigation.Research limitations/implications - The modelling is limited to dealing with the thermosolutal convection of two-dimensional cases. More complicated phenomena (e.g. crystal movement) and 3D geometry should be considered in future research.Practical implications - The present model can be used to analyze the effects of process parameters on macrosegregation and, with further development, could be applied as a useful tool in casting practice.Originality/value - The numerical simulation demonstrates the capability of the model to simulate the thermosolutal convection and macrosegregation in alloy solidification. It also shows, that the present model has good application potential in the prediction and control of channel segregation.

Segregation of Alloying Elements in Passive Systems—ii. Numerical Simulation

Numerical Simulation of Solute Segregation Patterns for a Binary Alloy Using Phase-Field Approach

Effect of Material Parameters on Dendritic Patterns of Ni-Cu Binary Alloy Using Phase-Field Simulation

Numerical Simulation of Macrosegregation During Solidification of Binary Alloys

Understanding the surface segregation behavior of transition metals on Ni(111): a first-principles study.

Simulation of a-segregate formation in binary alloys

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Numerical Simulation of Macro-Segregation Formation During Solidification Process of Immiscible Alloys

Segregation to grain boundaries in disordered systems: an application to a Ni-based superalloy

Simulation of the Dendrite Morphology and Microsegregation in Solidification of Al–Cu–Mg Aluminum Alloys

Phase Boundary Segregation in Multicomponent Alloys: A Diffuse-Interface Thermodynamic Model

A Response to Numerical Benchmark for Solidification of Binary Alloys: Macro-Segregation with Thermo-Solutal Convection

Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model

PARTITION BEHAVIOR SIMULATIONS OF MINOR ELEMENTS DURING Ni-BASED ALLOY SOLIDIFICATION

Modelling Of The Thermosolutal Convection And Macrosegregation In The Solidification Of An Fe-C Binary Alloy

Numerical Simulation of A-Segregation Evolution in a 55-Ton Ingot Using Four-Phase Solidification Model

Electronic Properties of the Passive Films Growth on Cu-Ni Alloy from the Viewpoint of Point Defect Model and Power-Law Model

Numerical Simulation of Macrosegregation with Multiphase Model and Non‐Orthogonal Grids

Numerical Simulation of Macro-Segregation with Equiaxed Grains Movement

Modeling Diffusion-Governed Solidification of Ternary Alloys – Part 2: Macroscopic Transport Phenomena and Macrosegregation

Numerical Simulation of Transport Phenomena in Solidification of Multicomponent Ingot Using A Continuum Model