Abstract:Lithium metal is a promising anode candidate for high-energy-density secondary batteries due to its high theoretical capacity and low electrochemical potential,while the uncontrolled dendrite growth causing poor cycling performance and safety concerns poses serious challenges for the practical application of lithium metal batteries.During the electrodeposition process,the lithium-ion(Li+)diffusion process is directly related to the electrode/electrolyte interfacial Li+ concentration gradient as well as the dendritic morphology.Regulating the anisotropic Li+ diffusion property is a convenient way to reshape its transfer behavior without introducing any external fields(e.g.,temperature field,magnetic field,acoustic field,etc.)or increasing the weight of batteries.Despite the large amount of experimental and theoretical work on the effect of the anisotropic Li+ diffusion behavior on the dendritic morphology,some open questions remain to be deliberated,e.g.,correlating the dynamic evolution of dendrite growth with the anisotropic Li+ diffusion induced by the electrolyte property,electric potential,and separator structure.In this paper,an electrochemical phase-field model is applied to explore the influences of electrolyte inherent anisotropic Li+ diffusion,electric potential-induced anisotropic Li+ diffusion,and separator-structure-induced anisotropic Li+ migration on dendrite growth via a homemade MATLAB code.Instead of a fixed numerical value,the modified Li+ diffusivity in the electrolyte(DL)is expressed as a second-order tensor by decomposing into two components along the x(Dxx)and y(Dyy)directions,which is not only able to explore the electrolyte inherent anisotropic Li+ diffusion but also easy to describe the electric potential-induced fluctuations of DL and the corresponding Li+ concentration distribution.Predicted results indicate that with the increase of Dyy:Dxx,the interfacial Li+ concentration gradient is alleviated due to the accelerated longitudinal Li+ replenishment and decelerated transversal"entrainment"phenomenon,thus decreasing the driving force of dendrite growth.Besides,the electric potential-induced interfacial Li+ fast diffusion layer can also reduce the electric potential gradients surrounding the dendrite tips and then uniform the dendrite morphologies.Surprisingly,separators with higher matrix tilt angles are demonstrated to achieve effective anisotropic Li+ diffusion in electrolyte,which can not only reduce the dendrite-growth velocity,but also extend the dendrite-growth pathway and prolong the battery short circuit time.Following this,electrolyte with the Dyy:Dxx = 10:1 and separator with the matrix tilt angle of arctan(0.5)are evaluated as promising materials for lithium metal batteries.This study provides a rational guidance for designing electrolytes or separators with dendrite-inhibiting capability.

Improving Lithium Deposition in Porous Electrodes: Phase Field Simulation

Phase Field Modeling of Lithium Deposition in Porous Lithium Metal Anodes

Deep understanding of lithium deposition mechanisms in lithium metal anode porous hosts by combining phase-field simulations with experimental verification

Modeling of Porous Lithium Metal Electrodes: Turning the Li-Dendrite Problem Around

Driving lithium to deposit inside structured lithium metal anodes: A phase field model

Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries

Inhibiting Dendrite Growth by Customizing Electrolyte or Separator to Achieve Anisotropic Lithium-Ion Transport:A Phase-Field Study

Toward Dendrite-Free Metallic Lithium Anodes: from Structural Design to Optimal Electrochemical Diffusion Kinetics

Electrochemically Induced Highly Ion Conductive Porous Scaffolds to Stabilize Lithium Deposition for Lithium Metal Anodes

Morphology evolution of electrodeposited lithium on metal substrates

Coordinating Ionic and Electronic Conductivity on 3D Porous Host Enabling Deep Dense Lithium Deposition Toward High-Capacity Lithium Metal Anodes

Phase-Field Modeling of Dendrite Growth in Lithium Electrodeposition Process in Lithium Metal Batteries

A conductive-dielectric gradient framework for stable lithium metal anode

Phase-field simulation tending to depict practical electrodeposition process in lithium-based batteries

Pore-scale Simulation of Reactive Transport Processes in Lithium-Oxygen Batteries

Recent advances in lithiophilic materials: material design and prospects for lithium metal anode application

In-situ Growth of Iron Nanoparticles on Porous Carbon Nanofibers for Structural High-Performance Lithium Metal Anode

Columnar Lithium Metal Deposits: the Role of Non-Aqueous Electrolyte Additive

Enabling Stable Lithium Metal Anode Through Electrochemical Kinetics Manipulation

Phase-Field Modeling of Li Deposits Growth in Li-Ion Batteries

Mechanisms of Stable Cycling 3D Structured Anodes for Lithium Metal Batteries