Abstract:The organic herbicides of chlorophenoxyacetic acids, including 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA), have posed serious threats to aquatic ecosystems and human health due to extensive use, high solubility and degradation-resistant. In this study, the efficient adsorbent (MOF-808) was synthesized through solvothermal synthesis method and further evaluated for the adsorption performances of 2,4-D and MCPA. Results showed that MOF-808 exhibited the Type I nitrogen adsorption–desorption isotherm with a specific surface area of 2,155 m2·g−1, pore volume of 0.59 cm3·g−1 and pore size of 1.41 nm. It was suggested that the pseudo-second-order and Langmuir model were much better to illustrate the adsorption performances of MOF-808 for both 2,4-D and MCPA, and the maximum adsorption capacities of 793 and 775 mg·g−1 were achieved, respectively; besides, the adsorption processes were spontaneous and primarily driven by chemical adsorption with contributions from physical-chemical adsorption. Additionally, the adsorption capacities for 2,4-D and MCPA were decreased with the increasing of pH and cations concentrations; the optimal pH was 3.0 for 2,4-D and 4.0 for MCPA, and the effects of four cations on pesticides adsorption followed the order of Ca2+ > Mg2+ > Na+ > K+. Reuse experiments demonstrated that MOF-808 could retain a high removal rate of 95.9 % (2,4-D) and 95.8 % (MCPA) at the fifth cycle. The spectral analysis revealed that the adsorption mechanisms of 2,4-D and MCPA by MOF-808 involved electrostatic interactions, π-π interactions, hydrogen bonding, and complexation. In conclusion, the well-defined physicochemical properties and outstanding adsorption performance of the synthesized MOF-808 may provide a potential application for the removal of chlorophenoxyacetic acid herbicides from real wastewater.

Efficient Adsorption of Pesticides by Porous Organic Polymers Based on Imine/aminal Linkages

Efficient Adsorption of Triazole Fungicides Using a Porous Organic Polymer with Imine/aminal Linkages

Mesoporous Poly (Melamine–Formaldehyde) Resin as an Efficient Adsorbent for the Removal of Forchlorfenuron Pesticide from Water

Synthesis of porphyrin and resorcinarene-based porous organic polymers for the superfast adsorption of bisphenol A and cationic herbicides

Optimization and verification of selective removal of organophosphate esters from wastewater by molecularly imprinted adsorbent

Efficient Removal of Pb(Ii) by Amine Functionalized Porous Organic Polymer Through Post-Synthetic Modification

Post-crosslinking of conjugated microporous polymers using vinyl polyhedral oligomeric silsesquioxane for enhancing surface areas and organic micropollutants removal performance from water

Sustainable synthesis of hydroxyl-functional porous organic framework as novel adsorbent for effective removal of organic micropollutants from water

Porous Aromatic Framework Modified Electrospun Fiber Membrane as a Highly Efficient and Reusable Adsorbent for Pharmaceuticals and Personal Care Products Removal

A Cyclophosphazene-Derived Porous Organic Polymer with P-N Linkage for Environmental Adsorption Applications

Superfast removal of dyes and herbicides with triphenylamine-based porous organic polymers by one-step sulfonation and carboxylation

Functional Porous Organic Polymers with Conjugated Triaryl Triazine As the Core for Superfast Adsorption Removal of Organic Dyes

Porous calix[4]pyrrole-based polymers with high surface area for efficient removal of polar organic micropollutants from water

A carbonised sieve-like corn straw cellulose–graphene oxide composite for organophosphorus pesticide removal

Metal-organic frameworks as superior adsorbents for pesticide removal from water: The cutting-edge in characterization, tailoring, and application potentials

Installation of synergistic binding sites onto porous organic polymers for efficient removal of perfluorooctanoic acid

Efficient and rapid removal of typical phenolic compounds from water with biobased porous organic polymers

Porphyrin based porous organic polymer modified with Fe 3 O 4 nanoparticles as an efficient adsorbent for the enrichment of benzoylurea insecticides

Preparation and Performance of MOF-808 (Zr-Mof) for the Efficient Adsorption of Phenoxyacetic Acid Pesticides

A Descriptive and Comparative Analysis on the Adsorption of PPCPs by Molecularly Imprinted Polymers

Polymer-modified Halloysite Nanotubes with High Adhesion and UV-shielding Properties for Chlopyrifos Application on Cotton Leaves