Study on the Ion Substitution Mechanism of CsPbIBr 2 Films Prepared by a Drop-Coating Method
Li Gong,Jun-Sen Zhang,Cheng Wang,Hao Fu,Yang-Fan Lu,Jian-Lin Chen,Jin-Cheng Fan,Zi-Sheng Chao
DOI: https://doi.org/10.1021/acsaem.1c00284
IF: 6.4
2021-05-03
ACS Applied Energy Materials
Abstract:In this paper, the ion substitution mechanism of CsPbIBr<sub>2</sub> films prepared by a drop-coating method is studied. CsI/CsBr methanol solution is drop-coated on a CsPbIBr<sub>2</sub> precursor film to prepare the CsPbIBr<sub>2</sub> perovskite film. After drop-coating, it is found that the color of the perovskite film changes with CsI/CsBr methanol solution drop-coated on the perovskite precursor film. When CsBr methanol solution is drop-coated on a CsPbIBr<sub>2</sub> precursor film, the color of the obtained CsPbIBr<sub>2</sub> film is orange. The color of the obtained CsPbIBr<sub>2</sub> film is brown while CsI methanol solution is drop-coated on a CsPbIBr<sub>2</sub> precursor film. Then, the hole-free, carbon-based CsPbIBr<sub>2</sub> perovskite solar cells (FTO/ZnO/CsPbIBr<sub>2</sub>/C) are fabricated. For the solar cells fabricated by drop-coating with 30 μL of CsBr, without methanol solution, with 10 μL of CsI, with 50 μL of CsI, and with 90 μL of CsI, the power conversion efficiency (PCE) values are 2.98, 3.99, 6.04, 7.60, and 8.42%, respectively. The short-circuit current density (<i>J</i><sub>SC</sub>) also increases with the changing of drop-coating solution. Therefore, we suppose that perhaps there is an ion substitution during the preparation of the CsPbIBr<sub>2</sub> films. The ion substitution supposition is verified by the results of X-ray diffraction, ultraviolet–visible spectra, X-ray photoelectron spectroscopy, and secondary ion mass spectroscopy. Specifically, the I element is replaced by the Br element while drop-coating CsBr methanol solution. The Br element is substituted by the I element by drop-coating CsI methanol solution. Also, it is verified that the ion substitution occurs in the entire perovskite film.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00284?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00284</a>.The performance parameters of 15 individual solar cells with or without different amounts of CsI/CsBr methanol solution; EDX mapping images for the CsPbIBr<sub>2</sub> films prepared with or without different amounts of CsI/CsBr methanol solution; the full spectrum of CsPbIBr<sub>2</sub> films prepared with or without CsI/CsBr methanol solution; ToF-SIMS profiles of CsPbIBr<sub>2</sub> films prepared on different substrates by different conditions; parameters of TRPL; and the parameters of equivalent circuit based on the CsPbIBr<sub>2</sub> devices fabricated with 30 μL of CsBr methanol solution, without methanol solution, and with 90 μL of CsI methanol solution (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00284/suppl_file/ae1c00284_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels