Abstract:This research mainly aims at the construction of the novel acceleration pedal, the brake pedal and the steering system by mechanical designs and mechatronics technologies, an approach of which is rarely seen in Taiwan. Three highlights can be addressed: 1. The original steering parts were removed with the fault tolerance design being implemented so that the basic steering function can still remain in case of the function failure of the control system. 2. A larger steering angle of the front wheels in response to a specific rotated angle of the steering wheel is devised when cornering or parking at low speed in interest of drivability, while a smaller one is designed at high speed in favor of driving stability. 3. The operating patterns of the throttle, brake, and steering wheel can be customized in accordance with various driving environments and drivers' requirements using the self-developed software. The implementation of a steer-by-wire system in the remote driving control for a go kart is described in this study. The mechatronic system is designed in order to support the conversion from human driving to autonomous driving for the go kart in the future. The go kart, using machine vision, is wirelessly controlled in the WiFi frequency bands. The steer-by-wire system was initially modeled as a standalone system for one wheel and subsequently developed into its complete form, including front wheel steering components, acceleration components, brake components, a microcontroller, drive circuit and digital to analog converter. The control output section delivers the commands to the subsystem controllers, relays and converters. The remote driving control of the go kart is activated when proper commands are sent by the vehicle control unit (VCU). All simulation and experiment results demonstrated that the control strategies of duel motors and the VCU control were successfully optimized. The feasibility study and performance evaluation of Taiwan's go karts will be conducted as an extension of this study in the near future.

Automatic driving device and control method for intelligent vehicle

Design Project for Automatic Driving Control System of Intelligent Vehicle

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Design, Fabrication, and Control Algorithm of Self-Reconfigurable Modular Intelligent Vehicles

Electric vehicle motor drive control system

Automotive Steering System and Its Controller Design for Intelligent Vehicles

Automatic steering system for intelligent vehicle based on dSPACE RCP

Control Strategy and Simulation Verification of Hardware-in-the-loop System of Automotive Steering Device

Intelligent active safety forewarning system of automobile

A Design of Intelligent Car Based on STC89S52 Single Chip Microcomputer

Mechatronics and Remote Driving Control of the Drive-by-Wire for a Go Kart

Intelligent tracking car system based on single chip microcomputer

Design and implementation of intelligent vehicle car of an automatic inspection

Intelligent Car Control System Design Based on Single Chip Microcomputer

Variable transmission ratio design of a steer-by-wire system for intelligent vehicles

Research on Application in Intelligent Vehicle Automatic Control System

A Universal Control Scheme of Human-Like Steering in Multiple Driving Scenarios

Design and Implementation of Intelligent Car Controlled by Voice

Design of the Control System for A Four-Wheel Driven Micro Electric Vehicle

Trend of passenger car steering system with electronic control

Hydraulic Pressure Control And Parameter Optimization Of Brake-By-Wire System Based On Driver-Automation Cooperative Driving