Abstract:One of key factors in designing high-performance alloys is to understand their incipient behavior. To get detailed real-time atomic scale evolutions of multi-principal element alloys (MPEAs) during nanoindentation incipient yielding, molecular dynamics (MD) simulations were carried out. Emphases are given to the effects of lattice distortion (LD) and chemical short-range ordering (CSRO) on the initiation of plasticity in body-centered cubic (BCC) MPEAs. The initial plastic mechanism is embryo nucleation assisted and the incipient behavior is strongly affected by LD and CSRO. Specifically, the embryo nucleation load P e is reduced by LD and CSRO and the incipient drop P 0 is lowered by LDI that only comes from atomic size difference and further declined by CSRO. This is because LD and CSRO could boost embryo nucleation, which can act as precursors for dislocation nucleation. This is consistent with the free-end nudged elastic band observations. Although P e is weakened by LDII generated by introducing extra elements, P 0 is intensified because severe LD could dominate the following process. The dislocation starvation mechanism is found in an average-atom (AA) model. However, it is replaced by dislocation interactions due to LD and CSRO. Density functional theory (DFT) calculations suggest that charge density distribution and the amount of directional Al-Al bonding would play a critical role in the onset of plastic deformation. When a larger indenter radius was used in MD simulations, the dislocation starvation mechanism is absent in AA model due to the reduced maximum shear stress. Instead, the dislocation propagation prevails. With respect to the orientation effect, three investigated orientations demonstrate a distinct yielding behavior.

Interactions Between Edge Dislocation and Irradiation Dislocation Loop in BCC Refractory High Entropy Alloys and the Lattice Distortion Effect on Irradiation Hardening Behavior

Irradiation damage versus lattice distortion in AlNbTiVCrx (x = 0, 0.5, 1) high-entropy alloys from first-principles calculations and irradiation experiments

Atomic-Scale Three-Dimensional Irradiation-Induced Defect Kinetics Models for Bcc Fe-Based Alloys

The Hierarchical Energy Landscape of Edge Dislocation Glide in Refractory High-Entropy Alloys

Irradiation damage behavior of the non-equal atomic AlNbMoZrB high-entropy alloy

Multiscale Modeling of Dislocation-Mediated Plasticity of Refractory High Entropy Alloys

Anomalous local distortion in BCC refractory high-entropy alloys

Irradiation-Hardening Model of TiZrHfNbMo0.1 Refractory High-Entropy Alloys

Molecular dynamics simulations of interaction between a super edge dislocation and interstitial dislocation loops in irradiated L12-Ni3Al

Interactions between irradiation-induced defects and dislocations in concentrated solid solution alloys

Correlating Local Lattice Distortion with Dislocation Pinning in Refractory High-Entropy Alloys

Influence of rhenium-decorated dislocation loops on edge dislocation gliding in tungsten

Lattice distortion and re-distortion affecting irradiation tolerance in high entropy alloys

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Severe local lattice distortion in Zr- and/or Hf-containing refractory multi-principal element alloys

Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy

Effects of lattice distortion and chemical short-range ordering on the incipient behavior of Ti-based multi-principal element alloys: MD simulations and DFT calculations

Atomic Irradiation Defects Induced Hardening Model in Irradiated Tungsten Based on Molecular Dynamics and CPFEM

Irradiation Behaviors in BCC Multi-Component Alloys with Different Lattice Distortions

The Effects of Different Factors on Obstacle Strength of Irradiation Defects: an Atomistic Study

A Probabilistic Coupled Hardening Model of Double Irradiation Defects in Iron