Abstract:In this study, we have used cotton silk as a source of abundant hydroxyl groups for the fast nucleation/growth of cobalt oxide (Co 3 O 4 ) nanowires via a hydrothermal method. The crystal planes of the Co 3 O 4 nanowires well matched the cubic phase. The as-synthesized Co 3 O 4 nanowires mainly contained cobalt and oxygen elements and were found to be highly sensitive towards uric acid in 0.01 M phosphate buffer solution at pH 7.4. Importantly, the Co 3 O 4 nanowires exhibited a large surface area, which was heavily utilized during the immobilization of the enzyme uricase via a physical adsorption method. The potentiometric response of the uricase-immobilizing Co 3 O 4 nanowires was measured in the presence of uric acid (UA) against a silver/silver chloride (Ag/AgCl) reference electrode. The newly fabricated uric acid biosensor possessed a low limit of detection of 1.0 ± 0.2 nM with a wide linear range of 5 nM to 10 mM and sensitivity of 30.6 mV dec −1 . Additionally, several related parameters of the developed uric acid biosensor were investigated, such as the repeatability, reproducibility, storage stability, selectivity, and dynamic response time, and these were found to be satisfactory. The good performance of the Co 3 O 4 nanowires was verified based on the fast charge-transfer kinetics, as confirmed via electrochemical impedance spectroscopy. The successful practical use of the uric acid biosensor was demonstrated based on the recovery method. The observed performance of the uricase-immobilizing Co 3 O 4 nanowires revealed that they could be considered as a promising and alternative tool for the detection of uric acid under both in vitro and in vivo conditions. Also, the use of cotton silk as a source of abundant hydroxyl groups may be considered for the remarkably fast nucleation/growth of other metal-oxide nanostructures, thereby facilitating the fabrication of functional electrochemical devices, such as batteries, water-splitting devices, and supercapacitors.

Surface modified ZnONFs with Oleic acid to fabricate nanobiosensors for uric acid detection

Electrochemical Ultrasensitive Sensing of Uric Acid on Non-Enzymatic Porous Cobalt Oxide Nanosheets-Based Sensor

Label free Electrochemical Biosensor using Zinc Oxide-Reduced Graphene Oxide Nanocomposite for Uric Acid Detection

A Non-Enzymatic Uric Acid Sensor Utilizing Ion Channels in the Barrier Layer of a Porous Anodic Alumina Membrane

Nitrogen-doped zinc oxide thin films biosensor for determination of uric acid.

Highly Sensitive Uric Acid Biosensor Based on Individual Zinc Oxide Micro/nanowires

Synthesis of Ni2+ ion doped ZnO-MWCNTs nanocomposites using an in situ sol-gel method: an ultra sensitive non-enzymatic uric acid sensing electrode material

Non-Enzymatic Electrochemical Sensor Based on ZIF-67 and Mwcnts-ZIF-67 Nanocomposites for Detection of Uric Acid in Human Urea

Nickel ferrite modified nickel foam with enriched active sites for the efficient electrochemical sensing of uric acid

ZnS and Reduced Graphene Oxide Nanocomposite-Based Non-Enzymatic Biosensor for the Photoelectrochemical Detection of Uric Acid

Designed Mini Protein 20 Mimicking Uricase Encapsulated in ZIF-8 as Nanozyme Biosensor for Uric Acid Detection

ZnO nanoflakes decorated graphene oxide acting as an efficient platform for precise detection of uric acid via rhodamine fluorescence quenching

Design of Nanostructured Hybrid Electrodes Based on a Liquid Crystalline Zn(II) Coordination Complex-Carbon Nanotubes Composition for the Specific Electrochemical Sensing of Uric Acid

A Nanostructured Sensor Based on Gold Nanoparticles and Nafion for Determination of Uric Acid

Surface Functionalized Plasmonic Sensors for Uric Acid Detection With Gold-Graphene Stacked Nanocomposites

The fast nucleation/growth of Co3O4 nanowires on cotton silk: the facile development of a potentiometric uric acid biosensor

Uricase conjugated nanostructured NiFe 2 O 4 /rGO modified flexible screen-printed carbon electrode based interface for long-range electrochemical determination of uric acid

Self-activating zinc oxide encapsulated polyaniline-grafted chitosan composite for potentiometric urea sensor

ZnO nanorods anchored on CNTs incorporating carbon cloth flexible electrode as a highly sensitive electrochemical sensor

Bimetallic Nanoparticles Decorated Hollow Nanoporous Carbon Framework As Nanozyme Biosensor for Highly Sensitive Electrochemical Sensing of Uric Acid.

Uricase biofunctionalized plasmonic sensor for uric acid detection with APTES-modified gold nanotopping