Abstract:Pt/CeO2 catalysts with nanoporous structures were prepared by the facile dealloying of melt-spun Al92-XCe8PtX (X = 0.1; 0.3 and 0.5) ribbons followed by calcination. The phase compositions and structural parameters of the catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The specific surface area and pore size distribution were characterized by N-2 adsorption-desorption tests. The catalytic properties were evaluated by a three-way catalyst (TWC) measurement system. The results revealed that the dealloyed samples exhibited a nanorod framework structure. The Pt nanoparticles that formed in situ were supported and highly dispersed on the CeO2 nanorod surface and had sizes in the range of 2-5 nm. For the catalyst prepared from the melt-spun Al91.7Ce8Pt0.3 ribbons, the 50% CO conversion temperature (T-50) was 91 degrees C, and total CO could be converted when the temperature was increased to 113 degrees C. An X-ray photoelectron spectroscopy (XPS) test showed that the Pt-0.3/CeO2 sample had a slightly richer oxygen vacancy; and a H-2 temperature-programmed reduction (H-2-TPR) test demonstrated its superior adsorption ability for reduction gas and high content of active oxygen species. The experiments indicated that the catalytic performance could be retained without any attenuation after 130 h when water and CO2 were present in the reaction gas. The favorable catalytic activities were attributed to the high specific areas and small pore and Pt particle sizes as well as the strong interactions between the CeO2 and Pt nanoparticles. The Pt nanoparticles were embedded in the surface of the CeO2 nanorods, inhibiting growth. Therefore, the catalytic stability and water resistance were excellent.

Preparation technique of nano Pd-loaded honeycomb-structured Al2O3 catalyst

A facile one-step method for the fabrication of Pd-AlOOH/Al monolithic catalysts via redox reactions of two galvanic cells

Preparation of Pd/α-Al_2O_3 Honeycombs for Catalytic Lean Burn of CH_4

Influences of Pd precursors and preparation method on the catalytic performances of Pd-only close-coupled catalysts

Facile Approach to Prepare Pd Nanoarray Catalysts Within Porous Alumina Templates on Macroscopic Scales.

Pd-AlOOH/Al Honeycomb Monolith Catalysts Obtained from Pd(II) Complex Precursor with Different Ligands by a Facile One-Step Method

Enhanced Electro-Catalytic Performance Of Pd-Based Hierarchical Nanoporous Structures Fabricated By Micropatterning And Dealloying Of Pd-Ni-P Metallic Glass

Preparation of palladium-based catalyst by plasma-assisted atomic layer deposition and its applications in CO2 hydrogenation reduction

Preparation of PdNi bimetallic loaded amino modified porous carbon material catalyst based on chitosan and its applications

Preparation and Catalytic Activity of Egg-Shelled Catalyst Pd/α-Al2O3

Porous chitosan-derived activated N-doped carbon-supported Pd nanoparticles encaged in Al, Fe pillared montmorillonite as novel heterogeneous catalysts

One Pot Microwave Synthesis Of Highly Stable Aupd@Pd Supported Core-Shell Nanoparticles

Preparation of Freestanding Palladium Nanosheets Modified with Gold Nanoparticles at Edges

Facile syntheses and electrocatalytic properties of porous Pd and its alloy nanospheres

Hierarchical structure based on Pd(Au) nanoparticles grafted onto magnetite cores and double layered shells: Enhanced activity for catalytic applications

Biphasic Pd-Au Alloy Catalyst for Low-Temperature Co Oxidation

Direct Low-Temperature Hydrothermal Synthesis of Uniform Pd Nanoparticles Encapsulated Mesoporous TS-1 and Its Excellent Catalytic Capability

Synthesis of Ultrathin and Composition-Tunable PdPt Porous Nanowires with Enhanced Electrocatalytic Performance

Effect of preparation and reaction conditions on catalytic performances of honeycomb Pt/Al2O3

Smart Design Of Small Pd Nanoparticles Confined In Hollow Carbon Nanospheres With Large Center-Radial Mesopores

The Preparation And Catalytic Properties Of Nanoporous Pt/Ceo2 Composites With Nanorod Framework Structures