Abstract:The enhancement in selectivity of nanofiltration (NF) membranes is of great significance for extending the application areas and improving the process economy, especially for the separation of monovalent/divalent ions. The characteristics of moderately increased pore size, fewer nonselective defects and a more uniform structure are conducive to NF membrane exhibiting higher rejection of divalent ions but lower rejection of monovalent ions. Nonylphenol polyoxyethylene ether (NP-10) was introduced in interfacial polymerization process in this study to optimize the microstructure and surface properties of polyamide (PA) layer to manufacture highly selective NF membranes. The hydrophobic benzene ring and aliphatic chain in NP-10 could form a local space that restricted the interfacial polymerization reaction on the side of the oil phase, thereby appropriately increasing the pore size of the PA layer. It was advantageous to the permeation of water molecules and monovalent ions with a smaller radius. The long hydrophilic oxyethylene group as a guide could facilitate the uniform diffusion of the monomer to the water/hexane interface. NP-10 as an amphiphilic substance would form a self-assembled network at the water/hexane interface, which was expected to optimize the distribution of aqueous amine monomers at the phase interface. Meanwhile, introducing NP-10 can form a stable interface and reduce the interface disturbance, thus inhibiting the formation of non-selective macropores (or “defects”) in PA layer, which could improve the separation selectivity of monovalent/divalent ions. In addition, the hydrophilicity and electronegativity were also enhanced. The results showed that the MWCO of NF membrane increased from 210.1 Da (TFC-0) to 269.6 Da (TFC-0.25), and the average pore radius increased from 0.248 nm to 0.276 nm. The water flux of optimized membrane was doubled compared to the control membrane. Most important, the optimized exhibited higher rejection of divalent Na2SO4 (from 98.07% to 99.43%), and meanwhile lower rejection of monovalent NaCl (from 54.07% to 27.52%). NaCl/Na2SO4 separation factor reached up to 130.53, which was about four times of TFC-0 membrane.

Polyamide Nanofiltration Membrane Modified with Defective Covalent Organic Framework Interlayer for Selective Ion Sieving

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Janus charged polyamide nanofilm with ultra-high separation selectivity for mono-/divalent ions

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

Pore Functionalization of Cationic Covalent Organic Frameworks Membrane: A Case Towards Acid Recovery

Covalent Organic Framework-Mediated Thin-Film Composite Polyamide Membranes toward Precise Ion Sieving

Interfacial Polymerization Modulated by Cofs Interlayer to Fabricate Efficient Mono/Divalent Ions Separation Nanofiltration Membrane

Polyamide infiltration phenomenon on microfiltration support reduced by covalent organic frameworks net for faster desalination

Covalent organic framework membranes reconstructed pore channels through metal-phenolic complexation for dye/salt separation

Highly permeable polyamide nanofiltration membranes fabricated via the construction of anionic covalent organic frameworks /polydopamine composite interlayer

Thin Film Composite Nanofiltration Membrane with Tannic Acid Self-Assembled Coating As an Interlayer Achieves High Selectivity by Enhancing Size Exclusion Effect

Polyamide nanofiltration membrane with high mono/divalent salt selectivity via pre-diffusion interfacial polymerization

Double Polyamide Layers with CaCO 3 Nanoparticles as Scaffolds for High Performance Nanofiltration Membranes

Ionic liquid modified COF nanosheet interlayered polyamide membranes for elevated nanofiltration performance

Preparation of highly selective nanofiltration membranes by moderately increasing pore size and optimizing microstructure of polyamide layer

Anionic covalent organic framework membranes for the removal of per- and polyfluoroalkyl substances with enhanced selectivity

Polyphenol Coating As an Interlayer for Thin-Film Composite Membranes with Enhanced Nanofiltration Performance

Exploitation of Amine Groups Cooped up in Polyamide Nanofiltration Membranes to Achieve High Rejection of Micropollutants and High Permeance of Divalent Cations

Nanofiltration Membrane with a Mussel-Inspired Interlayer for Improved Permeation Performance.

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

An Efficient Co-Solvent Tailoring Interfacial Polymerization for Nanofiltration: Enhanced Selectivity and Mechanism