Abstract:Employing dynamic substructuring, real-time hybrid testing (RTHT) facilitates rapid and efficient assessment of dynamic behaviors of complex systems. In this study, the RTHT approach was applied to replicate high-speed maglev train-guideway coupling vibrations using multiple shaking tables. The maglev train, with strong nonlinear properties, served as the physical substructure, which was loaded by shaking tables to emulate the excitation of numerical guideway deformations. To accurately capture the continuous dynamic response of the guideway structure using rigid tables, the boundary coordination algorithm was introduced to transform the guideway deformation signal into a vibration command signal through a segmented linear polynomial optimization method. Afterwards, the algorithm was optimized based on least squares regression with breakpoint continuity constraints, addressing the stochastic track irregularities. To evaluate the performance and stability of the proposed boundary coordination algorithms for RTHT systems, closed-loop numerical experiments consisting of boundary and rate coordination, time integration algorithm, loading system dynamics, and delay compensation method were established, under varying speeds and excitations. Analysis results revealed that the proposed coordination algorithm significantly reduced the interface errors, whether considering bridge deformations or irregularities. At the design speed of 600 km/h, the max error of the boundary is of the scale of 10-3 mm when reproducing the bridge vibration, and approximately 10-1 mm when replicating bridge vibrations alongside irregularities. The presence of high-frequency vibrations associated with guideway deformation near joints and track irregularities poses challenges to interface reproduction. Despite these challenges, the reproduction accuracy remains high within the dominant frequency band. Furthermore, the algorithm's signal output to the interface command demonstrates high stability and proves the feasibility of multiple shaking tables to reproduce the maglev train-guideway boundary in RTHT.

Boundary Coordination Algorithm for Real-Time Hybrid Test of High-Speed Maglev Train-Guideway Coupling Vibration

Evaluation of Control Accuracy for a Boundary-Coordinating Device in a Real-Time Hybrid Test

A Novel Moving Load Integration Method for Real-Time Hybrid Shaking Table Test of High-Speed Maglev Vehicle–Bridge Interaction System

Off-Line Hybrid Simulation Method on Train–Track–Bridge Coupling Vibration in High-Speed Railway

Adaptive Compound Control for the Real‐time Hybrid Simulation of High‐speed Railway Train–bridge Coupling Vibration

A Real-Time Hybrid Testing Method for Vehicle-Bridge Coupling Systems

A Combination Strategy of Hollow-Closed-wall In-Filled Trench and Elastic Bearing for Reducing Environmental Vibration Induced by High-Speed Train

Disturbance rejection control in real-time hybrid simulation of vehicle-bridge coupling vibration

Coupling vibration analysis of high-speed maglev train-viaduct systems with control loop failure

Analysis of Cross-Platform Coupling Vibration of Ultra-High-Speed Maglev Track Beam System

Random Vibration Analysis of High-Speed Moving Maglev Train on Simply Supported Bridge Considering Track Irregularity

Adaptive compensation method for real-time hybrid simulation of train-bridge coupling system

Lateral Vibration Mitigation for Coupled High-Speed Rail Vehicle and Cable-Stayed Bridge System Subjected to Ground Motions

Shaking‐table substructure test using a MDOF boundary‐coordinating device

A Vertical Coupling Dynamic Analysis Method and Engineering Application of Vehicle–track–substructure Based on Forced Vibration

Vertical Vibration Analysis of Vehicle-Track-Subgrade Coupled System in High Speed Railway with Dynamic Flexibility Method

Dynamic Model of High-Speed Maglev Train-Guideway Bridge System with a Nonlinear Suspension Controller

Dynamic Response Analysis of Vehicle–Bridge Coupled Systems of Low-to-Medium-Speed Maglev Long-Span Bridges

An improved model for the nonlinear simulation of the high‐speed vehicle‐track‐bridge coupling system under seismic shaking

High-speed Running Maglev Trains Interacting with Elastic Transitional Viaducts

Real-time Hybrid Simulation of High-Speed Train-Track-bridge Interactions Using the Moving Load Convolution Integral Method