Abstract:Mg alloys usually deform under complex biaxial compressive stress states (e.g. during drawing, forging and extrusion). In order to better understand how the biaxial compressive stress state influences the evolution of the microstructure and the deformation compatibility, the uniaxial and biaxial compression tests of AZ31 rolled sheets were performed at room temperature. The new self-developed biaxial compression devices offered a possibility to obtain the evolution of the microstructures by in situ measurements via electron backscatter diffraction. The analysis of geometrically necessary dislocation and the simulation based on the visco-plastic self-consistent method were used to examine the microscopic behaviors in the sheets during the uniaxial and biaxial compression tests. The results indicated that the reorientation of the texture during the biaxial compression was different from that during the uniaxial compression. The simulated results based on the visco-plastic selfconsistent model suggested that the equivalent yield strength under a biaxial compressive stress state was lower than that under a uniaxial stress state. This was due to the higher relative activity of extension twins under biaxial compressive stress state. This also led to a lower geometrically necessary dislocation density in the biaxial compressed sample. The geometrically necessary dislocations were also more homogeneously distributed with a biaxial compressive stress state. The analysis of the activation of all the deformation mechanisms proved that the appearance of extension twinning variants limited the activation of prismatic slip during the uniaxial compression while promoting prismatic slip during the biaxial compression. This changeable interaction between extension twinning and prismatic slip combining with the lower geometrically necessary dislocations, the lower flow stress inferred that the application of the biaxial compressive stress state during processing at room temperature was a way to improve the deformability of Mg alloys.

Shear-Coupled Multiaxial Deformation Behavior of Rolled AZ31B Magnesium Alloy

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

Numerical simulation of plastic behavior and meso inhomogeneous deformation in AZ31 Mg alloy

Mechanical Behavior and Microstructure Evolution of a Rolled Magnesium Alloy AZ31B under Low Stress Triaxiality

Theoretical Calculation of Schmid Factor and Its Application under High Strain Rate Deformation in Magnesium Alloys

Mechanical Behavior and Microstructural Evolution in Rolled Mg-3Al-1Zn-0.5Mn Alloy under Large Strain Simple Shear

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Effect of Biaxial Compressive Stress State on the Microstructure Evolution and Deformation Compatibility of Rolled Sheet Mg Alloy AZ31 at Room Temperature

Mg-3Al-1Zn alloy deformed along different strain paths: Role of latent hardening

Characterization of Yield Surface Evolution of AZ31 from Shear to Equibiaxial Tension

Orientation factor analysis of deformation mechanisms under special processing techniques in AZ31 magnesium alloys

Research on deformation mechanism of AZ31 magnesium alloy during uniaxial compression

Plastic Deformation and Fracture Mechanisms of Rolled Mg-8Gd-4Y-Zn and AZ31 Magnesium Alloys

Research on Deformation Mechanism of AZ31 Magnesium Alloy Sheet with Non-Basal Texture During Uniaxial Tension at Room Temperature: A Visco-Plastic Self-Consistent Analysis

Anisotropy and Deformation Mechanisms ofAs-Extruded Mg-3Zn-1Y Magnesium AlloyUnder High Strain Rates

Study on the deformation behavior of AZ31B-O magnesium alloy with the VPSC model

Mechanical Behavior of AZ31B Magnesium Alloy Sheet at Different Strain Rates and Stress States

Plastic Deformation Mechanisms of AZ31 Magnesium Alloy under High Strain Rate Compression

Anisotropic Deformation of Extruded Magnesium Alloy AZ31 under Uniaxial Compression: A Study with Simultaneous in Situ Synchrotron X-Ray Imaging and Diffraction

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Asymmetry in the hot deformation behavior of AZ31B magnesium sheets