Abstract:The unidirectional liquid spreading without external energy input has presently aroused widespread concern. Recently, on the peristome of Nepenthes alata, a novel 2D unidirectional liquid spreading has been reported. It has been revealed that its exquisite superhydrophilic multistage microstructure, overlapping microcavities with arc-shaped edges and wedge-shaped corners, is the main reason for this phenomenon. To fabricate a peristome-inspired surface, a replica molding method is highly efficient and provides an ideal structure. However, the curved shape of the finally formed surface cannot be adjusted, and a specific surface shows only one type of liquid spreading state, greatly limiting its potential application. Here, we aimed to develop a novel surface-tension-assisted replica molding method to fabricate an artificial peristome film. The artificial peristome film was fabricated by pouring styrenic block copolymers (SBS) dissolved in organic solvents into a negative replica prepared in polydimethylsiloxane (PDMS), based on the natural peristome. With volatilizing the organic solvent, the SBS agglomerates formed an artificial peristome film via surface tension effects. More importantly, the PDMS-negative replica swelled in the organic solvent and then returned to the original size, which is conducive for replicating microstructures. The liquid spreading speed could be dynamically controlled by stretching the artificial peristome film. We demonstrated that the microcavity wedge angle decreases with an increasing stretching ratio. A smaller wedge angle can result in a much stronger unidirectional liquid spreading ability. This study provides insight into the dynamic control of unidirectional liquid spreading for novel pump-free medical microfluidic devices.

Surface-Tension-Confined Channel with Biomimetic Microstructures for Unidirectional Liquid Spreading

Wetting Behaviors and Mechanism of Micro Droplets on Hydrophilic Micropillar-Structured Surfaces

Uni-directional liquid spreading control on a bio-inspired surface from the peristome of Nepenthes alata

Bioinspired Unidirectional Liquid Spreading Channel-Principle, Design, and Manufacture

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Uni-Directional Transportation on Peristome-Mimetic Surfaces for Completely Wetting Liquids

Enhancing Spontaneous and Continuous Liquid Directional Transport on Peristome-mimetic Surface with Hierarchical Microgrooves

A Bioinspired Flexible Film Fabricated by Surface-Tension-Assisted Replica Molding for Dynamic Control of Unidirectional Liquid Spreading.

Bioinspired Smart Peristome Surface for Temperature-Controlled Unidirectional Water Spreading.

Fabrication of a Flexible Biomimetic Film with Spontaneously Unidirectional Water-Spreading Property

A Novel Bioinspired Continuous Unidirectional Liquid Spreading Surface Structure from the Peristome Surface of Nepenthes Alata

Controllable Directional Liquid Transport in Open Channel

Controllable Droplet Self-Transport on Multi-Bioinspired Slippery Liquid-Infused Microstructure Surface

Surfaces Inspired by the Nepenthes Peristome for Unidirectional Liquid Transport

A Novel Microstructure Inspired from Nepenthes Alata and Lizard Skin and Its Enhanced Uni-Directional Liquid Spreading Property

Unidirectional Liquid Manipulation Via an Integrated Mesh with Orthogonal Anisotropic Slippery Tracks

Effective Unidirectional Wetting of Liquids on Multi-Gradient, Bio-Inspired Surfaces Fabricated by 3D Printing and Surface Modification

Asymmetric Liquid Wetting and Spreading on Surfaces with Slanted Micro-Pillar Arrays

Controllable Water Behaviors on V-shape Micro-Grooved Titanium Alloy Surfaces Depending on the Depth-to-width Aspect Ratio

Strengthening unidirectional liquid pumping using multi-biomimetic structures

Universal Liquid Self-Transport Beneath a Flexible Superhydrophilic Track