Abstract:In this paper, an adaptive approximation approach is proposed for the design of a divider and a square root (SQR) circuit. In this design, the division/SQR is computed by using a reduced-width divider/SQRcircuit and a shifter by adaptively pruning some insignificant input bits. Specifically, for a 2n=n division, 2k and k (k < n) consecutive bits are selected starting fromthe most significant `1' in the dividend and divisor, respectively. At the same time, redundant least significant bits (LSBs) are truncated or if the number of remaining bits after pruning is smaller than the number of bits to be kept, `0's are appended to the LSBs of the inputs. To avoid overflow, a 2ok thorn 1THORN=ok thorn 1THORN divider is used to compute the 2k=k division. Finally, an error correction circuit is proposed to recover the error caused by the shifter using ORgates. For a 2n-bit approximate SQR circuit, similar pruning schemes are used to obtain a 2k-bit radicand. A 2k-bit SQR circuit and a shifter are then utilized to compute the SQR. This adaptive operation leads to very small maximumerror distances of the approximate divider and SQR circuits, as shown by a theoretical error analysis. The proposed 16/8 approximate divider using an 8/4 exact array divider is 2:5 as fast but only consumes 34.42 percent of the power of the accurate design. Compared to the accurate 16-bit arraySQR circuit, the approximate design with a 6-bit radicand is 3:9 as fast and consumes 20.66 percent of the power. The approximate SQR circuit using a 6-bit lookup table-based SQR circuit consumes 7.15 percent of the power of its corresponding accurate design. The proposed designs outperformother approximate designs in image processing applications including change detection (for the divider), envelope detection (for the SQR circuit) and image reconstruction (for both designs).

PACE: A Piece-Wise Approximate and Configurable Floating - Point Divider for Energy - Efficient Computing

Implementation of High Performance Single-Precision Divider

Approximate Floating-Point FFT Design with Wide Precision-Range and High Energy Efficiency.

An Energy-Efficient Approximate Divider Based on Logarithmic Conversion and Piecewise Constant Approximation

Optimally Approximated and Unbiased Floating-Point Multiplier with Runtime Configurability

Low Cost Design for Elementary Function Approximation Based on Piecewise Quadratic Interpolation

PAM: A Piecewise-Linearly-Approximated Floating-Point Multiplier with Unbiasedness and Configurability

LMM: A Fixed-Point Linear Mapping Based Approximate Multiplier for IoT

Adaptive Approximation in Arithmetic Circuits: A Low-Power Unsigned Divider Design

An Energy Efficient Floating Point Computing Infrastructure Embedding Ferroelectric Field Effect Transistor Based Ternary Content Addressable Memories

Hardware Implementation of Approximate Fixed-point Divider for Machine Learning Optimization Algorithm

Improving Performance of Floating Point Division on GPU and MIC

Design of Unsigned Approximate Hybrid Dividers Based on Restoring Array and Logarithmic Dividers

Metrics, Noise Propagation Models, and Design Framework for Floating-Point Approximate Computing

Low-Power Unsigned Divider and Square Root Circuit Designs Using Adaptive Approximation

RAPID: AppRoximAte Pipelined Soft Multipliers and Dividers for High-Throughput and Energy-Efficiency

An Area- and Energy-Efficient Hybrid Architecture for Floating-Point FFT Computations.

Efficient Approximate Floating-Point Multiplier With Runtime Reconfigurable Frequency and Precision

A High-Throughput Fixed-Point Complex Divider for Fpgas

Design of a Floating-point Coprocessor and Its Applications in Digital Platform for Power Electronics

A Review, Classification, and Comparative Evaluation of Approximate Arithmetic Circuits