Abstract:The contour error of the machined parts is an important index to evaluate the accuracy of CNC machining. Considering a multi-axis servo control system, a predictive compensation strategy for contour error is presented in this paper. First, the offline identification method is adopted to establish the transfer function of each motion system. In this case, the relationship between the interpolation command and the feedback position of the grating is determined for the selected machine tool. Thus, before machining, the trajectory information of each motion axis can be predicted according to the interpolation instruction and the transfer relationship. It can be converted into the contour trajectory of the part through kinematic analysis, so as to predict the contour error. Finally, the predicted contour error is compensated into the command trajectory to ensure the contour accuracy of the part to be machined. Compared to existing methods, our method can effectively reduce the trial-produced cycle of parts and avoid unnecessary waste of processing materials. Moreover, without increasing the complexity of the control system and greatly reducing the machining efficiency, the dynamic error caused by the dynamic characteristics of the shaft is reduced. Taking the starfish pattern and the contour line of the impeller as the milling processing experiment case, the contour error after compensation is greatly reduced compared with the contour error processed by the original command. Therefore, the predictive compensation method proposed in this paper can significantly improve the machining accuracy. In addition, it also has application value for trial production of complex curved parts.

A Hybrid Model for Pre-Compensating Servo Error in the Ball Screw System Based on High-Bandwidth Controller

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Coordination Control for Parallel Actuation of Hydraulic Power Assisted Ball Screw Drive System

A New Approach to the Pre-Compensation of Contour Errorsfor Three-Axis Machine Tools Using an Adaptive Cross-Coupled Controller

Prediction-Model-Based Contouring Error Iterative Precompensation Scheme for Precision Multiaxis Motion Systems

Online Koopman Operator-Based Feedforward Compensation Strategy for Fast Tool Servos with Robust High-Bandwidth Control

An Adaptive Control Mechanism for Improving the Loading Precision of Aircraft Hydraulic Servo Load Simulator

Positioning Error Prediction and Compensation of Ball Screw Feed Drive System with Different Mounting Conditions

Prediction and Compensation Strategy of Contour Error in Multi-Axis Motion System

Prediction of comprehensive thermal error of a preloaded ball screw on a gantry milling machine

Pre-Compensation Strategy for Tracking Error and Contour Error by Using Friction and Cross-Coupled Control

A Hybrid-Model-Based CNC Machining Trajectory Error Prediction and Compensation Methtyleod

Pre-compensation of Contour Errors for Five-Axis Machine Tools Through Constructing a Model Reference Adaptive Control

A Model Predictive Contouring Error Precompensation Method.

Iterative Pre-Compensation Scheme of Tracking Error for Contouring Error Reduction

A Novel Dynamic Contour Error Estimation and Control in High-Speed CNC

Pre-compensation of Friction for CNC Machine Tools through Constructing a Nonlinear Model Predictive Scheme

Compensation-based Characteristic Modeling and Tracking Control for Electromechanical Servo Systems With Backlash and Torque Disturbance

The Design of a Tracking Controller for Flexible Ball Screw Feed System Based on Integral Sliding Mode Control with a Generalized Extended State Observer

An Intelligent Non-Collocated Control Strategy for Ball-Screw Feed Drives with Dynamic Variations

Contour Error Dynamic Analysis and Predictive Control for Multi-Axis Motion System