Abstract:Al-7Si-Mg alloy castings have extensive applications in automotive industries, and the tensile properties of these alloys including yield strength, ultimate tensile strength and elongation are commonly used to judge their mechanical properties. In this work, the modified precipitation kinetics model, yield strength model and strain hardening model have been proposed to predict the tensile properties of Al-7Si-Mg alloys. The precipitation kinetics model can be used to predict the precipitate microstructure parameters including the precipitate density, size, size distribution, volume fraction, and composition and so on in these alloys, combining which with the strength model, their yield strengths can be obtained. The strain hardening model can be applied to simulate the stress-strain curves during tensile process, and the ultimate tensile strengths and elongations can be obtained by combining this model with the experimental data fitted with the expression (sigma(UTS)-sigma(Y))=m center dot sigma(Y)+n+f(T-ss). First, the evolution of precipitate microstructure parameters and yield strengths as a function of ageing time were simulated, and then their comparisons with the experimental results were performed. The possible reasons resulting in the deviations between simulated and experimental yield strengths were analyzed. The stress-strain curves during tensile process of Al-7Si-0.36Mg alloy were simulated using strain hardening model, and the influences of ageing treatment and as-cast microstructure refining scale on the parameters of dislocation storage rate, dynamic recovery rate and the stress-strain curves were analyzed. Then, the ultimate tensile strengths and elongations of Al-7Si-0.4Mg alloy aged at different temperatures were predicted which are in better agreement with the experimental results, and the influence of secondary dendrite arm spacing on tensile properties was also analyzed. Finally, the limitation of present model and the factors influencing the prediction precision of tensile properties were outlined.

Ductility Fracture Mechanisms of Al-7Si-Mg Casting Alloys Considering Si Particles: A Combined Experimental and Crystal Plasticity Study

Plasticity and ductile fracture modeling of an Al–Si–Mg die-cast alloy

The study of the tensile fracture process of Al-Li alloys

Coupled Influence of Constituents and Precipitates on Ductile Fracture of Al-Mg-Si Alloys

Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys

Modeling of Strain Hardening Behavior and Mechanical Properties of Al 7Si Mg Cast Aluminum Alloys During Tensile Process

Influences of Initial Porosity, Stress Triaxiality and Lode Parameter on Plastic Deformation and Ductile Fracture

Research on Tensile Fracture Behavior of Al-3.5Cu-7Si Alloy

Low cycle fatigue response and fracture mechanism in a novel Al-3.5Si-0.5Mg-0.4Cu casting alloy

Influence of constituents on the ductile fracture of Al–Cu–Mg alloys: Modulated by the aging treatment

Coupling Effect of Multiple Precipitates on the Ductile Fracture of Aged Al–Mg–Si Alloys

Transformation of Fracture Mode of an Al-Mg-Si-Cu Alloy Subject to Aging Treatment

Unsteady-State Horizontal Solidification of an Al–Si–Cu–Fe Alloy: Relationship Between Thermal Parameters and Microstructure with Mechanical Properties/Fracture Feature

Achieving excellent strength-ductility in Al–Si–Cu–Mg cast alloy via effective work hardening

Aging-dependent Coupling Effect of Multiple Precipitates on the Ductile Fracture of Heat-Treatable Aluminum Alloys

Experimental and Computational Study of Microstructural Effect on Ductile Fracture of Hot-Forming Materials

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Modeling on Fracture Toughness and Tensile Ductility of Al-Cu-Mg Alloy

Tensile properties and fracture behavior of Al–8Si alloy sheets with different Mg under natural aging

Study on Microstructure and Mechanical Properties of Al-Mg-Si-Cu Aluminium Alloy with High Ductility

Microstructure based analysis and predictive modeling of cast Al7Si1.5Cu0.4Mg alloy mechanical properties