Abstract:Metal working fluid industry is the major contributing sources of heavy metals. Their multiple industrial, domestic, and technological applications have led to their wide distribution in the environment, raising concerns over their potential effects on human health and the environment. Filtration technology is widely used to remove contaminants such as heavy metals because it is a low-cost wastewater treatment device that uses physical methods that are simple and effective. In this study, coconut composite activated carbon (CCAC) filter media has been explored for its adsorption abilities towards copper and zinc solutions from metal working fluids. The characteristic of CCAC was investigated using XRF analyser, SEM and FTIR analysis. This study described the performance of fixed-bed column filtration by using CCAC as the filter media under the effect of various bed heights (10,30,50 cm) and initial concentration of copper and zinc (10 and 20 mg/L) to assess the breakthrough curve. The results show that the CCAC surface is not smooth and porous, with many channels. It is connected to hydrogen linked, O-H and contains the highest value composition in MgCO 3 and CaCO 3 , which enhances metal precipitation removal of heavy metals. From the fixed-bed column study, the column with an initial copper and zinc concentration of 10mg/L and a bed height of 50 cm performed well in removing copper and zinc from synthetic copper and zinc solutions. The breakthrough and exhaustion times were less than 30 minutes and 3660 minutes for copper and zinc were less than 30 minutes and 3420 minutes respectively. The longer the lifespan of filter media, the better the filter media for heavy metal treatment. In conclusion, CCAC filter media was used as an alternative to the existing wastewater treatment process to remove copper and zinc from metal working fluids. It also can be applied in the current filtration system, especially for industrial Wastewater Treatment Plant (WWTP).

Comparative Analysis of the Feasibility of Oil PalmBiomass and Factory Tea Waste As Biosorbent for Copper Ions Removal from Wastewater

Application of Klebsiella oxytoca Biomass in the Biosorptive Treatment of PAH-Bearing Wastewater: Effect of PAH Hydrophobicity and Implications for Prediction

Applicability of a novel and highly effective adsorbent derived from industrial palm oil mill sludge for copper sequestration: Central composite design optimisation and adsorption performance evaluation

Optimization of copper adsorption from synthetic wastewater by oil palm-based adsorbent using Central Composite Design

Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights

Economical Wastewater Treatment for Removal of Copper (II) Ions From Wastewater

Study of copper removal by modified biomaterials using the response surface methodology, DFT Calculation, and molecular dynamic simulation

Removal of copper from aqueous solutions by adsorption on mahogany tree sawdust (swietenia mahagoni) in batch and fixed bed

Utilizing Sustainable Hemp Biomass as an Eco-Friendly for Potentially Toxic Elements Removal from Water

Copper ion removal from aqueous media using banana peel biochar/Fe3O4/branched polyethyleneimine

Copper(II) ion removal from aqueous solutions using alginate nanoparticles/ carboxymethyl cellulose/ polyethylene glycol ternary blend: Characterization, isotherm and kinetic studies

Removal of copper and zinc in metal working fluid using coconut composite filter media

Efficient Removal of Pb(II) from Aqueous Solutions by Using Oil Palm Bio-Waste/MWCNTs Reinforced PVA Hydrogel Composites: Kinetic, Isotherm and Thermodynamic Modeling

Coaction of bio-sorption and bio-filtration for the remediation of domestic and agricultural wastewater contaminated with heavy metal

Fabrication of tannic acid-incorporated polyvinylpyrrolidone/polyvinyl alcohol composite hydrogel and its application as an adsorbent for copper ion removal

Efficient copper ions adsorption property of the composite sepiolite-based polyethyleneimine alginate microspheres in wastewater treatment

Biochar Composite Adsorbent for the Removal of Copper (II) and Lead (II) from Wastewater Prepared by the Pyrolysis of Oil-Based Drilling Cuttings and Orange Peels

Optimization of preparation conditions of a novel low-cost natural bio-sorbent from olive pomace and column adsorption processes on the removal of phenolic compounds from olive oil mill wastewater

A comparative study of removal of Cu(II) from aqueous solutions by locally low-cost materials: marine macroalgae and agricultural by-products

Application of Cotton Stalk as an Adsorbent for Copper(II) Ions in Sustainable Wastewater Treatment

Copper and zinc adsorption from bacterial biomass - possibility of low-cost industrial wastewater treatment