Additively Manufactured Flexible Electronics Filled with Ionic Liquid for Cryogenic Pressure Sensing

Shuaishuai Meng,Hongyu Yi,Kongyu Ge,Limeng Zhan,Yifan Gao,Zhan Li,Hongjun Ji,Mingyu Li,Huanhuan Feng

DOI: https://doi.org/10.34133/adi.0052

2024-01-01

Advanced Devices & Instrumentation

Abstract:Flexible electronics have attracted increasing attention and are extensively used in medical care and health monitoring applications. However, research on their applications in low-temperature environments is limited, mainly owing to material intrinsic limitation. In this work, a cryogenic pressure sensor using low-melting (−71 °C) ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4) is fabricated via the template removal method. The sensor unit can function at temperatures ranging from −50 to 30 °C, with improved sensing performance at lower temperatures. At −50 °C, it demonstrates an ultralow detection limit of 0.5 Pa and a high sensitivity of 2.0 × 105 Ω/kPa, thereby enabling the detection of dynamic pressure loads with different frequencies (0.2 to 2 Hz) and waveforms (sine and triangle). Subsequently, these units are integrated into a 3 × 3 array and embedded into a bionic thumb. The sensor can accurately identify up to 9 independent touch points and recognize dynamic sliding with velocities in the range of 0.31 to 4.42 cm/s at an extremely low temperature (−50 °C), thus demonstrating remarkable multitouch and sliding trajectory recognition capabilities. Furthermore, the proposed sensor unit is expected to contribute to the research on the human–machine interface of space suits.