Synthesis of high surface area Cu/SiO2 nanofiber catalysts for non-oxidative ethanol dehydrogenation

Ales Styskalik,Tomas Pokorny,Zdenek Kral,Petr Machac,Zdenek Moravec,Lucie Simonikova,Vojtech Kundrat,Jiri Pinkas

DOI: https://doi.org/10.26434/chemrxiv-2024-hr9qx

2024-06-06

Abstract:Amidst growing concerns over the environmental impact of petroleum-based industries and their contribution to global ecological challenges, there is a pressing need for sustainable alternatives in chemical synthesis. This study addresses this imperative by exploring an innovative catalytic approach for the eco-friendly production of acetaldehyde from ethanol, a crucial chemical feedstock. Catalysts utilized so far perform poorly due to their low stability. Supported copper nanoparticles at higher temperatures suffer from the rapid deactivation caused by nanoparticles sintering and reduction of active sites by coking. To address this issue, the advanced copper nanoparticle-decorated silica nanofibres (107 nm in diameter) with outstanding surface area (700 m2 g−1) were synthesized and tested, showing enhanced stability in comparison to benchmark (Aerosil 300 SiO2/Cu). Two approaches were compared for the preparation of copper catalyst, i.e., dry impregnation and one-pot synthesis. Remarkably, the dry-impregnated DI-9.4 sample at 325 °C after 100 h maintained over 66 % of ethanol conversion with 99 % selectivity to acetaldehyde (acetaldehyde productivity: 3.09 g g h–1). This stability values surpass the benchmark catalyst, which dropped to 40 % of ethanol conversion. Our findings highlight the potential of the superior morphological advantage of electrospun SiO2 nanofibers as an efficient catalyst.

Chemistry

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the process of preparing acetaldehyde from ethanol dehydrogenation through efficient catalysts under non - oxidative conditions. Specifically, the research aims to develop a copper - based nanofiber catalyst with high stability and activity to replace the high - energy - consuming and environmentally - unfriendly production methods in the traditional petro - based chemical industry. The currently used catalysts are prone to deactivation at high temperatures, mainly due to the sintering of copper nanoparticles and coke deposition, which leads to a reduction in active sites. Therefore, this study improves the catalytic performance, especially the stability of the catalyst, by synthesizing a copper/silica nanofiber catalyst with a high specific surface area. The key issues mentioned in the paper include: 1. **Catalyst stability**: Traditional copper - based catalysts are prone to rapid deactivation when used at high temperatures due to the sintering of nanoparticles and coke deposition. 2. **Environmental friendliness**: Looking for sustainable and environmentally - friendly chemical synthesis methods to reduce dependence on the petro - based industry and its negative impact on the global ecology. 3. **Catalyst preparation methods**: Two different copper catalyst preparation methods - dry impregnation method and one - step synthesis method - are compared to determine which method can better improve the performance of the catalyst. Through these studies, the paper hopes to provide new ideas for the development of efficient and stable copper - based nanofiber catalysts, thereby promoting the industrial application of the important chemical process of ethanol dehydrogenation to prepare acetaldehyde.

Synthesis of high surface area Cu/SiO2 nanofiber catalysts for non-oxidative ethanol dehydrogenation

Highly efficient and robust Cu catalyst for non-oxidative dehydrogenation of ethanol to acetaldehyde and hydrogen

Copper Phosphinate Complexes as Molecular Precursors for Ethanol Dehydrogenation Catalysts

Co-production of Hydrogen and Acetaldehyde from Ethanol over a Highly Dispersed Cu Catalyst

Cu/MgO as an Efficient New Catalyst for the Non-Oxidative Dehydrogenation of Ethanol into Acetaldehyde

A CuZn-BTC derived stable Cu/ZnO@SiO2 catalyst for ethanol dehydrogenation

An alternative synthetic approach for efficient catalytic conversion of syngas to ethanol

Catalytic Performance and Reaction Pathways of Cu/SiO 2 and ZnO/SiO 2 for Dehydrogenation of Ethanol to Acetaldehyde

Critical Role of Cu Nanoparticle-Loaded Cu(100) Surface Structures on Structured Copper-Based Catalysts in Boosting Ethanol Generation in CO2 Electroreduction

Nickel‐Doped Facet‐Selective Copper Nanowires for Activating CO‐to‐Ethanol Electrosynthesis

Mildly Acidic Aluminosilicate Catalysts for Stable Performance in Ethanol Dehydration

Spherical Boron Nitride Supported Gold–Copper Catalysts for the Low‐Temperature Selective Oxidation of Ethanol

Mechanistic Insights into Nonoxidative Ethanol Dehydrogenation on NiCu Single-Atom Alloys

Enabling Direct-Growth Route for Highly Efficient Ethanol Upgrading to Long-Chain Alcohols in Aqueous Phase.

Au/CuSiO3 Nanotubes: High-performance Robust Catalysts for Selective Oxidation of Ethanol to Acetaldehyde

Copper-Based Catalysts Confined in Carbon Nanocage Reactors for Condensed Ester Hydrogenation: Tuning Copper Species by Confined SiO 2 and Methanol Resistance

Ethylene glycol and ethanol synthesis from dimethyl oxalate hydrogenation on the Cu/ZnO/SiO2 catalysts

High Performing and Stable Cu/NiAlOx Catalysts for the Continuous Catalytic Conversion of Ethanol into Butanol

Remarkably boosting ethanol upgrading to higher alcohols through cooperative catalysis of surface-interface multiple-active sites on nitrogen-doped carbon decorated copper-based catalysts

Synthesis of crotonic acid from ethanol by sequential catalysis

Efficient Tuning of Surface Copper Species of Cu/SiO2 Catalyst for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol