Abstract:The external piping system which connects power devices, valve control devices, actuators, etc. is an essential system on the aero engine. Under the combined effects of high fluid pressure and external vibration, multiaxial fatigue failure is the main factor that seriously affects the safety of the piping system. The objective of this paper is to establish the multiaxial fatigue life model for the typical welded fuel pipe of the piping system by combining fatigue testing, simulation and theoretical analysis which is of great guiding significance for the engineering application of the piping system. Firstly, the fatigue limits of welded fuel pipes under no and 13.5 MPa internal pressure are obtained by rotational bending fatigue tests using the up-and-down method. Three additional stress levels of rotational bending fatigue tests under no internal pressure are supplemented and then the S-N curve is further obtained by the group method. Since the corresponding fracture surface of the specimens locates at the weld toe near the fixed end, peak stress method is adopted to evaluate the fatigue performance of the weld toe on the pipe specimens. In addition, by comparing the fatigue limit with no and 13.5 MPa internal pressured pipes, it is obvious that the equivalent uniaxial stress corrected by Gerber formula is not applicable for the multiaxial fatigue condition which is caused by the combined effect of fluid pressure and displacement load. The local stress concentration factor caused by the weld toe is determined and based on Findley critical plane model, the multiaxial fatigue life model is established which simultaneously takes the local stress concentration effect, mean stress effect and multiaxial stress effect into consideration. The results of rotational bending fatigue tests under 13.5 MPa internal pressure are within the triple error dispersion band and the accuracy of the proposed life model are verified.

Fatigue Life Analysis of Air Conditioning Compressor-Piping System Based on Miner Damage Accumulation Theory with Acceleration Factor

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

Fatigue Performance Testing and Life Prediction of Welded Fuel Pipes

FATIGUE TEST ON Α VALUE IN MINER LINER ACCUMULATED DAMAGE THEORY

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Fatigue Life Prediction under Variable Amplitude Loading Using a Non-Linear Damage Accumulation Model

A Theoretical Method To Estimate The Fatigue Life Of Tensile Armors Of Flexible Pipes

Prediction Fatigue Life of Dumpers with Cumulative Fatigue Damage Approach and Finite Element Model

Study on Damage Accumulation and Life Prediction with Loads below Fatigue Limit Based on a Modified Nonlinear Model

Fatigue Analysis and Life Prediction of Dumpers with Cumulative Fatigue Damage Approach and Finite Element Model

A Miner's rule based fatigue life prediction model for combined high and low cycle fatigue considering loading interaction effect

The Analysis and Estimation of Vibration Fatigue for Pipe Fitting in Aviation Hydraulic System

The Compressor Crankshaft Fatigue Life Analysis Based on Rain Flow Count Method

Fatigue Life Estimation Considering Damaging and Strengthening of Low Amplitude Loads under Different Load Sequences Using Fuzzy Sets Approach

Prediction of Fuzzy Fatigue Life Under Low Amplitude Loading Strengthening

Fatigue life analysis of compressor bracket of car air conditioner

Fatigue Reliability Analysis of a Compressor Disk Based on Probability Cumulative Damage Criterion

Quantification of Low-Cycle Fatigue Life for a Gas Turbine Compressor Vane Carrier under Varying Operating Conditions

An Online Fatigue Damage Evaluation Method for Gas Turbine Hot Components

Fatigue Life Analysis of Turbine Disks Based on Load Spectra of Aero-Engines

Fatigue Life Prediction of a Pump Turbine Runner