Abstract:The mechanisms of CO2/CH4 adsorption in coal are the theoretical foundation for CO2 sequestration in coal seams targeted for enhanced coalbed methane recovery. Herein, by changing the model (low rank coal: WMC, middle rank coal: XM and high rank coal: CZ) with plenty of side aliphatic chains and functional groups established in the literature, the influence and mechanism of pore parameters and functional groups(-CH3, -OH, -C2O, -C=O) on the adsorption of CO2 and CH4 in different rank coals are systematically studied. Using the Connolly surface algorithm to calculate the pore volume (V F) and the specific surface area (S SA) of coal with different functional groups, it can be seen that the influence of the functional group change on the pore structure is related to the coal rank. Changing the various functional groups in the original coal structure to a unified functional group (-CH3, -OH, -C2O, or -C=O) will increase the accessible pore volume (V F) and the specific surface area (S SA), except in low-rank and middle-rank coal, where the ordered arrangement of -C=O will decrease V F and S SA. The adsorption capacities of different pore parameters and functional groups were calculated by Grand Canonical Monte Carlo simulation and density functional theory. On pure adsorption, the pore parameters exert greater influence than the functional groups. By comparing the adsorption energy of the original pore structure containing functional groups and that of modified pores without functional groups, the contributions of the pore structure and original functional groups on CO2/CH4 adsorption are 71 and 29% and 83 and 17%, respectively. Small-diameter pores and -C2O have a strong adsorption capacity. In terms of competitive adsorption, the -C=O functional groups and pore diameters ranging from 1.0 to 2.0 nm can significantly enhance the selectivity of CO2 over CH4. The CH4 and CO2 adsorption does not occur via rigorous monolayer adsorption; multilayer adsorption can occur for CH4 and CO2 with pore diameters of 1.0-2.0 and 1.0-2.2 nm, respectively, thus causing micropore filling. These quantitative results establish a foundation for the development of adsorption theory for CO2/CH4 in coal.

Effects of functional groups on supercritical CH4 adsorption and desorption characteristics of tectonically deformed coals

Supercritical CO2 adsorption and desorption characteristics and pore structure controlling mechanism of tectonically deformed coals

Deformation and reservoir properties of tectonically deformed coals

Expulsion of small molecule hydrocarbons and expansion of nanopores effect in tectonically deformed coal evolution

Molecular simulation of CH4 adsorption characteristics in bituminous coal after different functional group fractures

Evolutions of CO2 Adsorption and Nanopore Development Characteristics during Coal Structure Deformation

Deformation Of Coal Induced By Methane Adsorption At Geological Conditions

The Influence Mechanism of Pore Structure of Tectonically Deformed Coal on the Adsorption and Desorption Hysteresis

Effects of Pore Parameters and Functional Groups in Coal on CO2/CH4 Adsorption

Experimental Study of Adsorption Characteristics and Deformation of Coal for Different Gases

Effects of CO2 Adsorption on Coal Deformation During Geological Sequestration

Experimental research on adsorption characteristics of N2, CH4 and CO2 in coal under different temperatures and gas pressures

Mechanism of supercritical CO2 on the chemical structure and composition of high-rank coals with different damage degrees

Methane Adsorption Behavior and Energy Variations of Brittle Tectonically Deformed Coal under High Temperature and High Pressure

Exploring the ultramicropore structure evolution and the methane adsorption of tectonically deformed coals in molecular terms

Particle Size and Internal Structure of Deformed Coal: Microstructure and Adsorption/Desorption Characteristics of CO2 and CH4

Macromolecule simulation studies on mechanical properties and CH4/CO2 adsorption characteristics in bituminous coal matrix based on uniaxial tension–compression effect

Influence of functional groups on the microporous development and CO2-CH4 adsorption: A molecular simulation investigation

Effects of supercritical CO2 extraction on adsorption characteristics of methane on different types of coals

Mechanism of SC-CO2 extraction-induced changes to adsorption heat of tectonic coal

Experimental study of the effects of gas adsorption on the mechanical properties of coal