Abstract:This study is focused on a proposal of a smartphone imaging-based quantification for providing a simple and rapid method for the analysis of chemical oxygen demand (COD) and color throughout the use of the HSV and/or RGB model in digital devices. For COD, calibration curves were done based on the theoretical values of potassium biphthalate for a proper comparison between the spectrophotometer and the smartphone techniques. The smartphone camera and application attain an average accuracy higher than the analysis in the spectrophotometer (98.3 and 96.2%, respectively). In the color analysis, it was demonstrated that only the UV–vis bands measurement is not feasible to perform the real abatement of the dye in the water because the limiting concentration that allows obtaining a linear relationship in this equipment related to the dye concentration is about 10 mg L −1 . Above this value, the spectrophotometer can not reach the real difference of color in the solution. Meanwhile, the smartphone method by using the camera reaches linearity until 50 mg L −1 . From an environmental point of view, smartphones have been used for monitoring several organic and inorganic pollutants, however, no attempts have been published related to their use to evaluate the color and COD during wastewater treatment. Therefore, this investigation also aims to assess the utilization of these methods, for the first time, when high-colored water polluted by methylene blue (MB) was electrochemically treated by using a boron-dopped diamond (BDD) as the anode, with different current densities ( j = 30, 45, 60, and 90 mA cm −2 ). COD and color abatement results clearly showed that different organic matter/color removal efficiencies were achieved, depending on the j used. All the results are aligned with the studies already available in the literature, with the total removal of color in 120 min of electrolysis with 60 and 90 mA cm −2 , and almost 80% of COD abatement with the higher j . Moreover, samples of real effluent from beauty salons were compared, with standard deviation varying from only 3 to 40 mg O 2 L −1 , which is acceptable for COD values close to 2000. Finally, the methods here presented can be a great benefit for public water monitoring policies, since it is cheap and has a decentralized characteristic, given that smartphones are very common and portable devices.

Image Analysis to Demonstrate Adsorption and Absorption Processes Through Image Brightness Using Copper(II) Ions and Fish Scales in Teabags: A Colorimetric-Based Analysis

A Hand-Held Optoelectronic Tongue for the Identification of Heavy-Metal Ions

Ce-UiO-66-F4-based Composites Decorated with Green Carbon Dots for Universal Adsorption of Organic Pollutants Containing Hydrogen Bond Donors and Its Application Exploration

Application of PAR Modified Fish Scales for Adsorption and Colorimetric Detection of Heavy Metal Ions in Water Samples

Molecularly imprinted polymer on cotton materials as substrates for smartphone-based image and distance-based analysis of Cu(ii) in water samples

Colorimetric analysis of water and sand samples performed on a mobile phone

A miniaturized analytical system with packed epoxy-functionalized mesoporous organosilica for copper determination using a customized Android-based software

Investigation into the predictive performance of colorimetric sensor strips using RGB, CMYK, HSV, and CIELAB coupled with various data preprocessing methods: a case study on an analysis of water quality parameters

Manganese Detection in Water Samples via Photometrix Colorimetric Analysis on Smartphones, by using Silver Nanoparticles Prepared from Okara Extract

3D-Printed Colorimetric Copper Ion Detection Kit and Portable Fluorescent Sensing Device Using Smartphone Based on Ratiometric Fluorescent Probes

Decentralized environmental applications of a smartphone-based method for chemical oxygen demand and color analysis

Detection and quantification of Cu2+ ion using gold nanoparticles via Smartphone-based digital imaging colorimetry technique

THE PROSPECT OF DIGITALLY ENHANCED COLORIMETRY AS AN ANALYTICAL METHOD FOR WATER QUALITY DETERMINATION

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

Visual Determination of Copper (II) Using a Biomass Sourced Carbon Quantum Dot (CQD) Ratiometric Fluorescent Probe

Dual-mode optical chemodosimeter for detecting copper ions in the environment, food, and living organisms with smartphone

Ratiometric Lanthanide Metal‐Organic Frameworks (MOFs) for Smartphone‐Assisted Visual Detection of Food Contaminants and Water: A Review

Visual Artificial Tongue for Identification of Various Metal Ions in Mixtures and Real Water Samples: a Colorimetric Sensor Array Using Off-the-shelf Dyes

Development of a green metallochromic indicator for selective and visual detection of copper(II) ions

Carbon Dots from Natural‐Product: Applications as Adsorbent and Sensing of Fe3+ Ions

Highly Selective in Situ Metal Ion Determination by Hybrid Electrochemical “adsorption–desorption” and Colorimetric Methods