Abstract:High-speed serial link transmitters have been widely integrated in front-end ASICs. However, it’s difficult to achieve high data bandwidth, low power consumption and low jitter at the same time. In this paper, a 4×6.25 Gbps serial link transmitter core has been designed for high-speed front-end ASICs. The transmitter core is implemented in a commercial 0.18-μm CMOS technology. The core consists of a common ring-oscillator based PLL and four individual transmitter channels. Each channel contains a two-stage 20:2 serializer, a two-tap half-rate feed-forward equalizer and a clock manager circuit. With a new architecture of the final-stage serializer and half-rate feed forward equalizer, and an optimized selection scheme of the flip-flops in the serializer, the number of CML devices is decreased and the total power consumption is significantly reduced compared with previous works, while maintaining high data bandwidth and low jitter. To validate the designed transmitter core, a prototype chip has been fabricated and tested. The Test results show that the transmitter core operates from 3.5 to 6.75 Gbps. At a data rate of 6.25 Gbps, the PLL outputs a 3.125 GHz clock, with a phase jitter of 1.006 ps RMS, and the total jitter of the output data is 45.5 ps at a bit error rate of 1×10 -12 . The core occupies an area of 0.44 mm 2 and consumes 27.8 mW/Gbps at a 1.8 V supply.

A 0.18 μm CMOS 10-Gb/S multichannel transmitter with duty-cycle correction

3.125Gb/s Transmitter with 0.18μm CMOS Process

D-band CMOS Transmitter and Receiver for Multi-Giga-bit/sec Wireless Data Link

A 10Gb/s source-synchronous transmitter in 65nm CMOS technology

A CMOS 3.125 Gb/s Receiver for Multichannel 10 Gbit Ethernet Interface

An 11.05 Mw/Gbps Quad-Channel 1.25-10.3125 Gbps Serial Transceiver With A 2-Tap Adaptive Dfe And A 3-Tap Transmit Ffe In 40 Nm Cmos

A 6-Gb/s Wireline Transmitter Design with 3-Tap FFE in 28nm CMOS Technology.

A 1.8v Transmitter For 10/100 Mbps Ethernet Physical Layer

A 9.6gb/s 5+1-Lane Source Synchronous Transmitter in 65nm CMOS Technology

A 5+ 1-Lane 3–10 Gbps 3.5 Mw/gb/s Source Synchronous Receiver in 65 Nm CMOS Technology

A 10-Gb/s 5-Tap DFE/4-Tap FFE Transceiver in 90-Nm CMOS Technology

A 4.8-Mw/gb/s 9.6-Gb/s 5 &Lt;inline-Formula> &Lt;tex-Math Notation="tex">$+$</tex-Math></inline-formula> 1-Lane Source-Synchronous Transmitter in 65-Nm Bulk CMOS

A 28-Gb/s transmitter with 3-tap FFE and T-coil enhanced terminal in 65-nm CMOS technology

A 5-Gb/s 156-Mw Transceiver with Ffe/Analog Equalizer in 90-Nm Cmos Technology

A 4&Amp;#x00d7;20-Gb/s 0.86pj/b/lane 2-Tap-ffe Source-Series-terminated Transmitter with Far-End Crosstalk Cancellation and Divider-Less Clock Generation in 65nm CMOS

A Power Efficient 1.0625-3.125 Gb/s Serial Transceiver in 130 Nm Digital CMOS for Multi-Standard Applications.

A 10Gb/s analog equalizer in 0.18um CMOS

A 190mw 40gbps Serdes Transmitter and Receiver Chipset in 65nm Cmos Technology

A 4×6.25-Gbps Serial Link Transmitter Core in 0.18-Μm CMOS for High-Speed Front-End ASICs

A Millimeter Wave Digital CMOS Baseband Transceiver for Wireless LAN Applications

Design of a 1.12 Gb/s 11.3 Mw Low-Voltage Differential Signaling Transmitter