Dynamics and energy harvesting from parametrically coupled self-excited electromechanical oscillator

DOI: https://doi.org/10.1007/s11071-024-09698-2

IF: 5.741

2024-05-16

Nonlinear Dynamics

Abstract:The investigated parametrically coupled electromechanical structure is composed of a mechanical Duffing oscillator whose mass sits on a moving belt surface. The driving electrical network is a van der Pol oscillator whose aim is to actuate the attached DC motor to provide some rotatry unbalances and parametric coupling in the vibrating structure. The coupled oscillator is applied to energy harvesting and overcomes the limitation of low energy generation associated with a single oscillator of this kind. The system was solved analytically and validated by numerical methods. The global dynamics of the structure were investigated, and nonlinear phenomena such as Neimark–Sacker bifurcation, discontinuity-induced bifurcation, grazing–sliding, and bifurcation to multiple tori were identified. These nonlinear behaviors affect the harvested energy at bifurcation points, resulting in jumps from one energy level to another. In addition to harnessing the highest energy under hard parametric coupling, the coupling ensures that higher and more useful energy is harvested over a wider range of belt speeds. Finally, the qualitative validation of the numerical concept by experimental setup verifies the workings of the model.

engineering, mechanical,mechanics

What problem does this paper attempt to address?

The paper attempts to address the issue of how to improve energy harvesting efficiency through parameter coupling in friction-induced vibration (FIV) systems. Specifically, the study aims to overcome the limitations of single degree of freedom (1 DoF) systems in terms of low energy generation and limited bandwidth range.

### Background of the Paper
1. **Friction-Induced Vibration (FIV)**: Electromechanical vibrations exist in many modern systems, such as speakers, dedicated sensors, and power systems. These vibrations are often caused by nonlinear factors and pose a threat to the stable operation of the systems.
2. **Energy Harvesting Technology**: Vibration energy harvesting (VEH) technology utilizing nonlinear and non-ideal sources is significant in meeting the growing energy demand. This technology is not only environmentally friendly but also powers small electronic devices such as wireless sensor networks, communication devices, IoT, wearable medical applications, and transportation systems.
3. **Limitations of Existing Research**: Although there is a substantial amount of dynamic analysis on coupled oscillators, most studies focus on theoretical analysis, with fewer applications in energy harvesting. In particular, the application of friction-induced vibration systems in energy harvesting is limited and usually confined to a narrow bandwidth range.

### Research Objectives
1. **Introducing Electrical Circuit**: By introducing an electrical circuit of the Van der Pol oscillator and coupling it with mechanical substructure parameters to improve energy harvesting efficiency.
2. **Overcoming Low Energy Generation**: Traditional 1 DoF systems have limitations in low energy generation. The design proposed in this paper overcomes this issue through parameter coupling, making energy harvesting possible over a wider bandwidth range.
3. **Validating System Performance**: Validate the dynamic behavior of the system through analytical methods and numerical simulations, and verify the model's effectiveness through experiments.

### Main Contributions
1. **System Modeling**: A model of an electromechanical system containing a Van der Pol oscillator and a Duffing oscillator is proposed, which can achieve self-excitation and parameter coupling.
2. **Analytical Solution**: The method of multiple scales (MSM) is used to solve the analytical solution of the system under non-resonant conditions and identify various resonance conditions in the system.
3. **Numerical Analysis**: The global dynamic behavior of the system is analyzed through numerical methods, including bifurcation phenomena and their impact on energy harvesting.
4. **Experimental Validation**: The effectiveness of the numerical results is validated through experiments, further confirming the accuracy of the model.

### Conclusion
The study successfully improves the energy harvesting efficiency of friction-induced vibration systems by introducing the electrical circuit of the Van der Pol oscillator and parameter coupling. The combination of analytical and numerical methods provides an in-depth understanding of the system's dynamic behavior, while experimental validation further confirms the model's effectiveness. These findings offer new ideas and methods for future energy harvesting technology.