Abstract:Modern people spend more and more time in cars in their daily lives, and the pollution of formaldehyde in the car may directly affect people's health. Thermal catalytic oxidation technology by solar light is a potential way to purify formaldehyde in cars. MnOx-CeO2 was prepared by the modified co-precipitation method as the main catalyst, and the basic characteristic (SEM, N2 adsorption, H2-TPR, UV-visible absorbance) were also analyzed in detail. The experimental study was set up to simulate the solar photothermal catalysis of formaldehyde in-car environment. The results showed that the higher the temperature in the experimental box (56.7 ± 0.2°C, 62.6 ± 0.2°C, 68.2 ± 0.2°C), the better the formaldehyde degradation by catalytic effect (formaldehyde degradation percentage: 76.2%, 78.3%, 82.1%). With increase of the initial formaldehyde concentration (200 ppb, 500 ppb, 1000 ppb), the catalytic effect first increased and then decreased (formaldehyde degradation percentage: 63%, 78.3%, 70.6%). The catalytic effect risen gradually with the increase of load ratio (10g/m2, 20g/m2, and 40g/m2), and the formaldehyde degradation percentages were 62.8%, 78.3%, and 81.1%, respectively. According to the expressions of the Eley-Rideal (ER) model, the Langmuir-Hinshelwood (LH) model, and the Mars-Van Krevelen (MVK) model, the experimental results were fitted and verified, and it was found that the ER model had a high degree of fit. It is more suitable to explain the catalytic mechanism of formaldehyde by MnOx-CeO2 catalyst in the experimental cabin, where formaldehyde is in the adsorption state and oxygen is in the gas phase.Implications: Judging from the current research status, vehicles have become an indispensable mode of travel for people, and the air quality in the vehicle is not optimistic. Most vehicles generally have the phenomenon of excessive formaldehyde. The characteristic of formaldehyde in the car is the continuous release, especially in the hot summer, the temperature inside the car rises sharply under the sun radiation. At this time, the formaldehyde concentration exceeds the standard by 4 to 5 times, which can cause great damage to the health of the passengers. In order to improve the air quality in the car, it is necessary to adopt the correct purification technology to degrade formaldehyde. The problem brought by this situation is how to effectively use solar radiation and high temperature in the car to degrade formaldehyde in the car. Therefore, this study uses the thermal catalytic oxidation technology to catalyze the degradation of formaldehyde in the high temperature environment of the car in summer. The selected catalyst is MnOx-CeO2, mainly because manganese oxide (MnOx) itself is the most effective catalyst for volatile organic compounds (TCO) among transition metal oxides, and CeO2 has excellent oxygen storage and release capacity and Oxidation activity, which helps to improve the activity of MnOx. Finally, the effects of temperature, initial concentration of formaldehyde and catalyst loading on the experiment were explored, and the kinetic model of thermal catalytic oxidation of formaldehyde with MnOx-CeO2 catalyst was analyzed to provide technical support for the future application of this research in practice.

Self-heating Photothermal Synergistic Catalytic Decomposition of Carcinogenic Formaldehyde by Α-Mno2 at Ambient Temperature: Functional Roles of Surface Acidic-Basic Sites

Catalytic Ozonation of Formaldehyde with an Oxygen-Vacancy-Rich MnOx/γ-Al2O3 Catalyst at Room Temperature

Construction of α-MnO2/g-C3N4 Z-scheme heterojunction for photothermal synergistic catalytic decomposition of formaldehyde

Formaldehyde Ambient-Temperature Decomposition over Pd/Mn 3 O 4 -MnO Driven by Active Sites' Self-Tandem Catalysis

Efficient Photothermal Elimination of Formaldehyde under Visible Light at Room Temperature by a MnO x-Modified Multi-Porous Carbon Sphere

Catalytic performance and mechanism of bismuth molybdate nanosheets decorated with platinum nanoparticles for formaldehyde decomposition at room temperature

Enhanced oxidative ability, recyclability, water tolerance and aromatic resistance of α-MnO2 catalyst for room-temperature formaldehyde oxidation via simple oxalic acid treatment

Photo-induced thermal effect on Pt/CeO 2 surface for promoting formaldehyde oxidation performance by photothermal catalysis

Catalytic oxidation of formaldehyde by MnOx-decorated anatase TiO2{001}: Investigation of the effect of calcination temperature on catalytic activity and reaction mechanism

Facet-Controlled Synthesis of Mn 3 O 4 Nanorods for Photothermal Synergistic Catalytic Oxidation of Carcinogenic Airborne Formaldehyde

Facet-Controlled Synthesis of Mn3O4 Nanorods for Photothermal Synergistic Catalytic Oxidation of Carcinogenic Airborne Formaldehyde

Experimental study and kinetic model analysis on photothermal catalysis of formaldehyde by manganese and cerium based catalytic materials

MnO2 Framework for Instantaneous Mineralization of Carcinogenic Airborne Formaldehyde at Room Temperature

A first-principles study on Ni-decorated MoS2 for efficient formaldehyde degradation over a wide temperature range

The catalytic efficacy of modified manganese-cobalt oxides for room-temperature oxidation of formaldehyde in air

Study on the Formaldehyde Oxidation Reaction of Acid-Treated Manganese Dioxide Nanorod Catalysts

Enhanced formaldehyde oxidation over MnO2 and doped manganese-based catalysts: Experimental and theoretical Insights into mechanism and performance

Mn/HZSM-5 catalyst with high content of Mn 4+ and surface hydroxyls for formaldehyde oxidation at room temperature

Promotion of Formaldehyde Oxidation over Ag Catalyst by Fe Doped MnO X Support at Room Temperature

Synergically regulated silver species and surface oxygen on manganese oxide for promoted activity of formaldehyde oxidation

Enhanced the Synergistic Degradation Effect Between Active Hydroxyl and Reactive Oxygen Species for Indoor Formaldehyde Based on Platinum Atoms Modified MnOOH/MnO2 Catalyst.