Abstract:Fluid and effective fracture identification in reservoirs is a crucial part of reservoir prediction. The frequency-dependent AVO inversion algorithms have proven to be effective for identifying fluid through its dispersion property. However, the conventional frequency-dependent AVO inversion algorithms based on Smith & Gidlow and Aki & Richards approximations do not consider the acquisition azimuth of seismic data and neglect the effect of seismic anisotropic dispersion in the actual medium. The aligned fractures in the subsurface medium induce anisotropy. The seismic anisotropy should be considered while accounting for the seismic dispersion properties through fluid-saturated fractured reservoirs. Anisotropy in such reservoirs is frequency-related due to wave-induced fluid-flow (WIFF) between interconnected fractures and pores. It can be used to identify fluid and effective fractures (fluid-saturated) by using azimuthal seismic data via anisotropic dispersion properties. In this paper, based on Rüger's equation, we derived an analytical expression in the frequency domain for the frequency-dependent AVOAz inversion in terms of fracture orientation, dispersion gradient of isotropic background rock, anisotropic dispersion gradient, and the dispersion at a normal incident angle. The frequency-dependent AVOAz equation utilizes azimuthal seismic data and considers the effect of both isotropic and anisotropic dispersion. Reassigned Gabor Transform (RGT) is used to achieve high-resolution frequency division data. We then propose the frequency-dependent AVOAz inversion method to identify fluid and characterize effective fractures in fractured porous reservoirs. Through application to high-qualified seismic data of dolomite and carbonate reservoirs, the results show that the method is useful for identifying fluid and effective fractures in fluid-saturated fractured rocks.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to identify fluids and effective fractures through the frequency - dependent Amplitude Versus Offset and Azimuth (AVOAz) inversion technique. Specifically, the paper focuses on using the frequency - dependent AVOAz inversion method in fractured reservoirs to predict fluid properties and effective fracture distributions. Traditional methods are usually based on the assumption of isotropy and do not consider the azimuth information of seismic data, which may lead to misjudgments of fluid saturation and fracture distribution in fractured reservoirs. Therefore, this paper proposes a new method, namely the frequency - dependent AVOAz inversion technique, to overcome these limitations. ### Background of the paper - **Importance of the problem**: In oil exploration, accurately identifying fluid types (such as oil, gas, water) and effective fractures is crucial for evaluating reservoir potential. Although traditional AVO techniques can provide some information, they often overlook the frequency - dependence and anisotropic characteristics of seismic data, which limits their application effectiveness in fractured reservoirs. - **Limitations of existing methods**: Existing frequency - dependent AVO inversion methods are mainly based on the assumption of isotropy and do not consider the azimuth information of seismic data, which may lead to misjudgments of fluid saturation and fracture distribution in fractured reservoirs. ### Main contributions of the paper - **Theoretical basis**: Based on the Rüger equation, the paper derives the frequency - dependent AVOAz inversion formula. This formula takes into account the isotropic and anisotropic dispersion gradients, as well as seismic data at different azimuths. - **Method innovation**: Proposes the frequency - dependent AVOAz inversion method, which can utilize high - resolution frequency - decomposition data (achieved through the reassignment Gabor transform) to more accurately identify fluids and effective fractures. - **Practical application**: By applying high - quality seismic data, the effectiveness of this method in carbonate and dolomite reservoirs has been verified. The results show that this method has high accuracy in identifying fluids and effective fractures. ### Formula derivation The paper derives the frequency - dependent AVOAz inversion formula. The following are the key steps and formulas: 1. **Rüger equation**: \[ R(\theta, \phi)=A + B_{\text{iso}}\sin^{2}\theta + B_{\text{ani}}\sin^{2}\theta\cos(2\phi) \] where \( R(\theta, \phi) \) is the P - wave reflection amplitude, \( \theta \) is the incident angle, \( \phi \) is the azimuth angle, \( A \) is the P - wave reflection amplitude at normal incidence, and \( B_{\text{iso}} \) and \( B_{\text{ani}} \) are the isotropic and anisotropic gradients respectively. 2. **Frequency - dependent Rüger equation**: \[ R(\theta, \phi, f)=A(f)+B_{\text{iso}}(f)\sin^{2}\theta + B_{\text{ani}}(f)\sin^{2}\theta\cos(2\phi) \] 3. **Taylor expansion**: \[ R(\theta, \phi, f)\approx R(\theta, \phi, f_{0})+\frac{\partial R}{\partial f}\big|_{f = f_{0}}(f - f_{0}) \] 4. **Final frequency - dependent AVOAz equation**: \[ \Delta R(\theta, \phi, f)\approx C_{1}(f - f_{0})+C_{2}(f - f_{0})\sin^{2}\theta + C_{3}(f - f_{0})\sin^{2}\theta\cos(2\phi)+C_{4}(f - f_{0})\sin^{2}\theta\sin(2\phi) \] where \( C_{1}, C_{2}, C_{3}, C_{4} \) are unknown variables.

Fluid identification and effective fracture prediction based on frequency-dependent AVOAz inversion for fractured reservoirs

Reservoir Fluid Identification Method Incorporating Squirt Flow and Frequency-Dependent Azimuthal Anisotropic Inversion

An Improved Scheme of Azimuthally Anisotropic Seismic Inversion for Fracture Prediction in Volcanic Gas Reservoirs

MULTI-AZIMUTHAL AVO ANALYSIS OF FRACTURED RESERVOIRS

AVO Modeling Study on the Fractured Reservoirs

PP-Wave Reflection Coefficient Equation for HTI Media Incorporating Squirt Flow Effect and Frequency-Dependent Azimuthal AVO Inversion for Anisotropic Fluid Indicator

Modeling the effects of fracture infill on frequency-dependent anisotropy and AVO response of a fractured porous layer

Bayesian AVOAz Inversion of Fluid and Anisotropy Parameters Using Gibbs Sampling With AISM Algorithm

Geofluid Discrimination in Stress-Induced Anisotropic Porous Reservoirs Using Seismic AVAZ Inversion

The applicability and underlying factors of frequency-dependent amplitude-versus-offset (AVO) inversion

Quantitative prediction of fracture scale based on frequency-dependent shear wave splitting

A novel fluid identification method based on a high-precision spectral decomposition method

Seismic inversion and fracture prediction in tilted transversely isotropic media

Predicting Microcracks in Tight Sandstones Using Seismic Dispersion Attributes Derived From a New Frequency-Dependent AVO Inversion

Data-Driven Dynamic Inversion Method for Complex Fractures in Unconventional Reservoirs

Finely Description for Fractured Reservoir and Comprehensive Evaluation of Seismic

Mesoscopic Wave-Induced Fluid Flow Effect Extraction by Using Frequency-Dependent Prestack Waveform Inversion

Theoretical modelling of seismic dispersion, attenuation and frequency-dependent anisotropy in a fluid-saturated porous rock with intersecting fractures

A Novel Approach for Evaluating Gas Saturation Effects on the Phase Reversal Characteristics of Seismic AVO Responses From Strongly Attenuating Reservoirs

P-wave fracture prediction algorithm using pre-stack data with limited azimuth distribution: A case study in the TZ45 area, Tarim Basin, China

Characterizing fluid contacts by joint inversion of seismic P-wave impedance and velocity