Abstract:Acoustic emission (AE) and particle flow code (PFC 3D ) are utilized to characterize microcracking nature in mode-I fracture of coal with strong bursting liability. The microcracks are represented by AE moment tensor (MT), which corresponds to displacement discontinuities involving opening/closing and sliding motions. The microcracking source parameters, including shear/tensile type, volume, orientation, motion, and magnitude, are calculated by minimizing the errors between the analytical and measured displacements, with an imposed constraint. Then, the detailed fracture processes, including microcracking source mechanisms and energy dissipation during coal tensile failure, are analyzed using both experimental and numerical approaches. The results show that the time-varying of crack mode angle and decomposed crack volume suggest a mixed-mode mechanisms locally with both normal and tangential displacements for microcracks. However, the orientations of microcracks with bigger magnitude are almost parallel to the direction of the crack propagation path, and their movement directions are mainly along the direction of the maximum principal stress, which is compatible with the expected fracture mechanism of mode-I opening globally. The dissipated energy and crack opening displacement obtained from AE inversion are approximately consistent with results calculated from energy release rate G and opening displacement measured using DIC, respectively. A new AE MT simulation method, based on particle motion, is developed using PFC 3D to verify the reliability of the above-mentioned microcracking characterization results. The mechanical properties as well as AE responses (including AE rate, magnitude distribution, spatial location, and MT) from PFC 3D numerical simulation are in good agreement with the experimental results, which reinforces the reliability the microcracking characterization results from AE inversion and simulation. Due to the tortuous crack propagation path and the inhomogeneity between grains, the maximum principal stress and resultant displacement coexists both on the normal and tangential of the inclined crack surface. Under the combined action of tensile and shear stress, the normal and tangential motion displacement components along the crack plane are generated, respectively, resulting in mixed-mode microcrack. This research provides a new approach for characterizing the microcracks in loaded rock/coal, which can deepen the understanding of meso-process and mechanism during rock/coal fracture.

Micromechanical Properties of Different Rank Coal and Their Impact on Fracture Compressibility

Nano-mechanical Properties and Pore-Scale Characterization of Different Rank Coals

Nanomechanical behavior of coal with heterogeneous minerals and pores using nanoindentation

Research on mechanical properties of loaded coal at the micro/nanoscale by coupling nanoindentation and SAXS experiments

Nano-CT measurement of pore-fracture evolution and diffusion transport induced by fracturing in medium-high rank coal

Porosity and Fracture Changes of Coal under Uniaxial Strain Conditions Based on the X-ray Microscopic Imaging Technology

Micrometer-scale pores and fractures in coals and the effects of tectonic deformation on permeability based on fractal theory

Gas flow characteristics of coal samples with different levels of fracture network complexity under triaxial loading and unloading conditions

Mechanical heterogeneity characterization of coal materials based on nano-indentation experiments

New Method for Determining Mode-I Static Fracture Toughness of Coal Using Particles

Experimental investigation on the fractal feature of pore-fracture systems in bituminous coal and its influencing factors

Investigation of the influence of gas fracturing on fracturing characteristics of coal mass and gas extraction efficiency based on a multi-physical field model

The Effect of Norepinephrine and Dibutyryl Cyclic Adenosine Monophosphate on Cation Transport in Duck Erythrocytes

Relationship Between Micropore Structure of Different Coal Ranks and Methane Diffusion

Quantitative characterization of pore-fracture structure of medium and high-rank coal based on micro-CT technology

Origin of kinin enzymes and intracellular enzymes in the synovial fluid of rheumatoid patients.

Differences in Petrophysical and Mechanical Properties Between Low- and Middle-Rank Coal Subjected to Liquid Nitrogen Cooling in Coalbed Methane Mining

Evaluation of Compressibility of Multiscale Pore–Fractures in Fractured Low-Rank Coals by Low-Field Nuclear Magnetic Resonance

Ultrastructural variations and assessment of malignant transformation risk in oral leukoplakia.

Microcracking Characterization in Tensile Failure of Hard Coal: An Experimental and Numerical Approach

Assessing the impact of pore‐fracture structures on permeability sensitivity in tectonic coal using computerized tomography scanning