Abstract:Helical coil steam generator has the advantages of compact structure, high heat transfer efficiency, strong resistance to thermal expansion stress, and has been widely applied in energy and power engineering, chemical industry and other fields. As the energy transfer facility between firstsecond loops and the isolation barrier for radioactive working medium, the inner structure of helical coil steam generator is extremely complicated, hence its structural integrity and operation reliability are necessary guarantee for the nuclear power plant safety. In this paper, the porous media method was adopted to simplify the complex structure of the multilayer helical coil domain in heat exchange assemblies, a shell side working fluid flow heat transfer characteristics analysis model was established, and the tube side watersteam two phase flow boiling heat transfer characteristics analysis model was established based on the homogeneous flow hypothesis. The gridnode data mapping method was applied to realize the coupled heat transfer simulation between shell side and tube side, and a three-dimensional full-scale thermalhydraulic characteristics analysis code HeTAF for the helical coil steam generator was developed based on the open source CFD platform OpenFOAM. The validation was performed against flow boiling heat transfer experiment of helical tube by Santini, and the calculation results of heat transfer coefficient variation with quantity are in good agreement with the measured data, indicating that the adopted model package are capable for accurate prediction under high mass flux rate and heat flux experimental condition. The helical coil oncethrough steam generator in high temperature gas cooled reactorpebble module was selected as the research object. The simulation of single heat transfer assembly under full power operating condition was performed using HeTAF. The distributions of thermalhydraulic parameters including tube side and shell side fluid temperatures, heat transfer coefficient, heat transfer power, void fraction and equilibrium quantity along tube length were obtained, and the transition process of each phase state and dominant heat transfer mechanism in the helical tube was predicted. The calculation results of helium and steam outlet temperature are fixed well with the design value with absolute errors of 5.29 K and 5.76 K respectively, which illustrates that the HeTAF can effectively predict the thermalhydraulic characteristics of both shell side and tube side of single heat transfer assembly. The work in this paper has significance reference for the design and safety analysis of helical coil steam generator. In the future, based on the existing methodology and simulation strategy, the fullscale coupled thermalhydraulic characteristics analysis of the helical coil steam generator will be conducted, and supplementary validation and subsequent optimization of HeTAF code will be carried out continuously.

Numerical Simulation of the Thermal-Hydraulic Characteristics of the Liquid Metal Flow Across the Single-Start Helical Coiled Tube Bundles

Numerical Investigations of the LBE Flow and Heat Transfer Characteristics in the Helical-Coiled Tube Bundle

Numerical Analysis of Liquid Metal Helical Coil Once-Through Tube Steam Generator

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Parametric Sensitivity Analysis of Liquid Metal Helical Coil Once-Through Tube Steam Generator

Numerical and Experimental Analysis of LBE Flow and Heat Transfer Characteristics in Hexagonal Rod Bundles

Numerical Investigation on Heat Transfer Characteristics of Liquid Metal Cross Flow over Tube Bundles

Numerical Investigation of Thermal-Hydraulic Behaviors in a LBE-cooled 19-Pin Wire-Wrapped Rod Bundle

Modeling of Thermal Hydraulic Characteristics for a LBE-Cooled Fast Reactor Helical Coiled Type Steam Generator

Development of friction factor and heat transfer correlation of liquid metal flow in helical tube bundles

Numerical Study on Heat Transfer Characteristics of LBE Cross Flow Tube Bundle under Rolling Conditions

Flow and heat transfer evaluation of lead-bismuth eutectic coolant for nuclear power application

Heat Transfer Evaluation of Liquid Lead-Bismuth Eutectic Cross Flow Tube Bundle: Experimental Part

Numerical Simulation of Three-Dimensional Flow and Heat Transfer Characteristics of Liquid Lead–bismuth

The impact of tube bundle layout on the thermal and fluidic behaviour of liquid lead-bismuth eutectic in a helical-coiled once-through steam generator

Thermal-hydraulic Research on Rod Bundle in the LBE Fast Reactor with Grid Spacer

Influence of Helix Angle on Flow and Heat Transfer Characteristics of Lead-Bismuth Flow in Helical-Coiled Tube Bundles

Multiphase Simulation of Hyperbaric Steam-Water Jet Inside Liquid Pb-Bi Eutectic Environment

Development of Three-dimensional Thermal-hydraulic Analysis Code HeTAF for Helical Coil Steam Generator

Numerical heat transfer to LBE flow in a wire-wrapped 19-rod bundle using an OpenFOAM-based solver: fourParameterFoam

Numerical Investigation of the Heat Transfer Characteristics of Liquid Lithium Metal in Spiral Tubes