Effect of Introducing Chemically Activated Biochar As Support Material on Thermal Properties of Different Organic Phase Change Materials
Laiquan Lv,Shengyao Huang,Hao Zhou
DOI: https://doi.org/10.1016/j.solmat.2023.112617
IF: 6.9
2024-01-01
Solar Energy Materials and Solar Cells
Abstract:Chemically activated biochar with richer pore structure and higher specific surface area is well suited for loading phase change materials (PCMs). However, the effect of structural characteristics and abundant surface functional groups of chemically activated biochar on the thermal properties of PCMs has not been systematically investigated. Here, shape-stable samples were prepared by introducing biochar obtained by activation with different chemical reagents (ZnCl2, H3PO4, KOH, and K2CO3) into three organic PCMs (paraffin, stearic acid, and polyethylene glycol). The results indicated that the biochar activated by KOH possessed the highest specific surface area of 1344.45 m2/g, followed by biochar activated by ZnCl2, H3PO4, and K2CO3 of 1297.35, 1062.74, and 891.38 m2/g, respectively. The loading capacity of KOH-activated biochar was as high as 82.12 %, 83.13 %, and 80.81 % for the three organic PCMs, and the melting enthalpies of corresponding composite PCMs were 163.82, 168.54, and 139.96 kJ/kg. Additionally, the influence degree on the enthalpies of the three PCMs was only 10.84 %, 12.26 %, and 7.74 %, while that of ZnCl2 and H3PO4-activated biochar was as high as 53.61 % and 44.22 %, 52.10 %, and 57.74 %, 55.35 % and 45.79 % indicating the two biochar were not suitable as support materials for PCMs. Moreover, ZnCl2-activated biochar has the most apparent upgradation on PCMs' thermal conductivity, which could increase the thermal conductivity of the three organic PCMs by 1.318, 1.34, and 1.229 times, respectively, followed by H3PO4, K2CO3, and KOH-activated biochar.