Assessment of Radioactive Cesium Contamination in Concrete Structures near Fukushima Daiichi Nuclear Power Plant

Kazuo yamada, Hiroyuki Arai,Ippei Maruyama,Kazutoshi Shibuya,Kazuto Endo

DOI: https://doi.org/10.26434/chemrxiv-2024-bqr88

2024-05-20

Abstract:This study investigates the contamination of concrete by radioactive cesium released by the Tokyo Electric Power Company Fukushima Daiichi Nuclear Power Plant accident using samples from various sites in the town of Okuma, Japan. Concrete contamination was effectively evaluated through surface dose rate measurements using Geiger-Müller tubes with shielding. Corresponding radioactivity concentrations were evaluated using an NaI scintillator in a low background environment. The contamination levels were considerably lower in areas shielded from rain compared with outdoor areas exposed to rain. Contamination within concrete can be primarily attributed to radioactive Cs enrichment in specific concrete aggregates and further influenced by carbonation of the cement paste. In non-carbonated sections, radioactive Cs was concentrated in aggregates near the surface, hindering the penetration of detection into the cement paste. Concrete samples subjected to rain exhibited reduced contamination over time. Thus, rain exposure, aggregate properties, and the degree of carbonation emerged as pivotal in predicting concrete contamination. Therefore, this study yields insights into on-site measurement methods, temporal contamination trends in the environment, and the distribution of contamination within concrete structures.

Chemistry

What problem does this paper attempt to address?

### Problems Addressed by the Paper

This paper aims to investigate the contamination of radioactive cesium (Cs) in concrete structures following the Fukushima Daiichi Nuclear Power Plant accident. Specifically, through field surveys and analysis of concrete samples from different locations, the paper explores the following key issues:

1. **Contamination Level and Distribution**:
- The study measured the dose rate on concrete surfaces and assessed the specific radioactive concentration using Geiger-Müller tubes and NaI scintillation counters.
- It was found that rainwater significantly affects contamination levels, with areas shielded from rain showing lower levels of contamination.

2. **Contamination Mechanism**:
- The paper explores the primary causes of internal contamination in concrete, namely the accumulation of radioactive cesium in specific concrete aggregates and the impact of cement paste carbonation.
- In non-carbonated areas, radioactive cesium is concentrated in aggregates near the surface, hindering the detection process deeper into the cement paste.

3. **Temporal Variation Trends**:
- The study analyzed the trends in contamination changes over different time points, finding that concrete samples exposed to rainwater showed a decrease in contamination levels over time.
- It also examined how the presence of cracks affects changes in contamination levels, particularly noting higher dose rates in cracked areas.

4. **On-site Measurement Methods**:
- The paper proposed methods for assessing the contamination level of concrete on-site and discussed the effectiveness and limitations of different measurement tools (such as Geiger-Müller tubes and NaI scintillation counters).

In summary, this paper aims to provide a scientific basis for understanding the contamination of radioactive cesium in concrete structures around the Fukushima Daiichi Nuclear Power Plant through systematic research methods, and to offer guidance for subsequent decontamination and treatment efforts.