Abstract:High numerical aperture (NA) metalenses with large focusing efficiency are crucial for various applications in modern optics and photonics, particularly in high resolution imaging, high directivity lasing process and so on. Recent progresses have been achieved in designing high NA metalenses which can surpass conventional ones but mainly in the visible and infrared regimes by using all-dielectric metasurfaces. Here, multilayer phase gradient metallic metasurfaces sandwiched by filling dielectrics are employed to design high NA and large efficiency metalenses in the low spectrums. Benefiting from its high transmission amplitude and the full phase control to the incident waves of the proposed gradient meta-atoms with a double split ring resonator, the designed ultra-thin and small footprint four-layer metalens (5λ × 5λ × 0.23λ, λ is wavelength) demonstrates a high NA in the order of 0.8 and the large focusing efficiency around 40% according to the full-wave simulations and experimental measurements. Furthermore, the influences of the dielectric thickness and the layer number of stacked meta-atoms on the presented high NA metalens are investigated. The results reveal that the NA of proposed metalens can be surprisingly further improved from 0.8 to 0.9 by increasing dielectric thickness and/or the focusing efficiency can be enhanced to above 50% by adding the layer number of the stacked meta-atoms. These findings also imply that our high NA metalens in low spectrum can be compatible to the standard printed circuit board fabrication and also posses of good robustness to the metasurface layer number. The presented work provides new vistas to develop high NA and large efficiency metalens in low microwave or Terahertz (THz) spectrum, where the metallic metasurfaces are commonly used. Besides, it can benefit to the development of various novel metadevices such as miniaturized high-gain lens antenna, compact cloaks and many others in modern microwave engineering and/or THz optics.

Metalens with Tilted Structures for High-Efficiency Focusing at Large-Angle Incidences

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Fast and Efficient Inverse Design Framework for Multifunctional Metalenses

Designing high-efficiency extended depth-of-focus metalens via topology-shape optimization

Imaging Based on Metalenses

A wide-field-of-view metalens array for CMOS image sensors' conical light focusing

Efficient Inverse Design of Large-Scale, Ultrahigh-Numerical-Aperture Metalens

High numerical aperture and large focusing efficiency metalens based on multilayer transmitarray elements

High-efficiency, 80-mm aperture metalens telescope

High-efficiency and large-numerical-aperture focusing with subdiffraction resolution using a hybrid elastic metalens

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

Fabricable concentric-ring metalens with high focusing efficiency based on two-dimensional subwavelength unit splicing

Physics-data-driven intelligent optimization for large-aperture metalenses

Metalenses with polarization-independent adaptive nano-antennas

Synthetic Aperture Metalens

Recent advances of wide-angle metalenses: principle, design, and applications

Enhanced optical performance of multifocal metalens with conic shapes

Metalens in Improving Imaging Quality: Advancements, Challenges, and Prospects for Future Display

High focusing efficiency metalens with large numerical aperture at terahertz frequency

All-dielectric achromatic hole-array metasurfaces