Abstract:There are many mass-transfer models for predicting VOC emissions from building materials described in the literature. In these models, the volatile organic compound (VOC) emission rate and its concentration in a chamber or a room are usually obtained by analytical method or numerical method. Although these methods demonstrate some salient features, they also have some flaws, e.g., for analytical method the solutions of both room or chamber VOC concentration and building material VOC emission rate are constituted of the sum of an infinite series, in which additional computation for finding roots to a transcendental function is necessary, but sometimes quite complicated. Besides, when it is applied in complex cases such as multilayer emission with internal reaction, the solution is very difficult to get; for conventional numerical methods such as finite difference method, discrete treatment of both time and space may cause calculation errors. Considering that, the state-space method widely used in modern automation control field and the heat transfer field is applied to simulate VOC emissions from building materials. It assumes that a slab of building material is composed of a number of finite layers, in each of which the instantaneous VOC concentration is homogenous during the entire process of emission, while the time is kept continuous. Based on this assumption we can predict both the VOC emissions rate and the concentrations of VOCs in the air of a chamber or room. The method is generally applied to simulate VOC emissions from arbitrary layers of building materials, and the solution is explicit and simple. What's more, the method can be applied to the cases where a reaction producing/removing VOC in building materials exists. For some specific cases the method is validated using the experimental data and the analytical solutions in the literature. The method provides a simple but powerful tool for simulating VOC emissions from building materials, which is especially useful in developing indoor air quality (IAQ) simulation software.

An Analytical Model for Reverberation Time Prediction of Indoor Scenarios

Computer Simulation Model for Room Diffuse Sound Field

A computer simulation model for room sound field considering diffuse reflection

Practical Back-Analysis Methodology to Predict Underground Train-Induced Building Vibrations

Reverberation Time Estimation from Speech Signals Based on Blind Room Impulse Response Identification.

A prediction model of speech transmission index based on reverberation time in non-native linguistic context

Reverberation modeling and numerical simulation based on AR model

Predicting the Influence of Vibration from Trains in the Throat Area of a Metro Depot on Over-Track Buildings

Channel Impulse Response Analysis of the Indoor Propagation Based on Auto-Regressive Modeling.

Uncertainties of Reverberation Time Estimation Via Adaptively Identified Room Impulse Responses.

Numerical prediction model for long- and short-term concentration of indoor volatile organic compounds from building materials

Predicting the Temperature Distribution of a Non-Enclosed Atrium and Adjacent Zones Based on the Block Model

A coherent model of sound propagation in long enclosures with different acoustics boundaries

A Coherent Image Source Method for Sound Prediction in Long Spaces with a Sound Absorbent Ceiling

Fast and accurate prediction of air temperature and velocity field in non-uniform indoor environment under complex boundaries

Fade-in Reverberation in Multi-room Environments Using the Common-Slope Model

Simulation Model of Sound Field in Street Space Caused by Noise Transmitted from Bordering Large Workshop Buildings

A Time-Varying Model for Predicting Formaldehyde Emission Rates in Homes

Simulation of Voc Emissions from Building Materials by Using the State-Space Method

Field measurement of reverberation time and average absorption of one high-rise building room by road traffic noise penetrating facade

Steady-state model for predicting size-resolved gas-particle partitioning of semi-volatile organic compounds (SVOCs) in indoor environments