Abstract:The WNbMoTa-based refractory high entropy alloy (RHEA) is expected to become a new generation of hightemperature materials due to its high thermal stability, which can be used in aerospace, nuclear energy and other fields. In this paper, TN10 (TN is the abbreviation of Ti and Ni elements), TN15, TN20 and TN25 nonequimolar WNbMoTa-based RHEAs were designed based on phase engineering and formed by laser powder bed fusion (LPBF) technology. The solidification thermodynamics, microstructure and mechanical properties (compressive strength at 25 degrees C) of the four alloys were analyzed, and the strengthening mechanism of TN20 alloy was studied. The compressive yield strength of the four alloys exceeds 2050 MPa, the ultimate compressive strength exceeds 2550 MPa, and the elongation exceeds 9%. The compressive yield strength of TN20 alloy is 2513 MPa, the ultimate strength is 3127 MPa, and the elongation is 11.38%. The room temperature (25 degrees C) compressive yield strength of TN20 alloy is the highest among the high entropy alloys studied so far. TN20 alloy is composed of BCC matrix phase and grain boundary phase containing three different structures, which are B2 TiNi phase, Ni55Nb25Ti15Ta5 phase generating stacking faults and Ni70Ti20Nb10 secondary precipitated phase. The micrometer matrix phase and nanometer grain boundary phase of TN20 alloy show a network distribution in fine crystal region. After the matrix phase cracks due to high thermal stress, the flow TiNi-rich grain boundary phases precipitate to fill the cracks. The grain boundary phase with high proportion in this region is enhanced by the secondary phase and its nanoprecipitated phase. In other regions, stacking faults are generated by the Ni55Nb25Ti15Ta5 phases, which convert the thermal stress that induces crack into lattice defects of the crystal. On the other hand, the content of B2 phase is the highest in grain boundary phase, and the grain boundary between B2 phase and matrix phase is a coherent grain boundary, which realizes the high quality combination of grain boundary phase and matrix phase. The design and strengthening of WNbMoTa-based nonequimolar RHEAs are studied in this paper, which is expected to provide a reference for the design of a new generation of high entropy alloy.

New Strategy in Light-Weight and Ultrastrong Ti40Nb15Mo30(NbC)15 Refractory Complex Concentrated Alloy

Sub-micron grains and excellent mechanical properties of low-density Ti40Nb30Mo30-C refractory complex concentrated alloy reinforced with in-situ (Ti, Nb)C

Novel as-cast Ti-rich refractory complex concentrated alloys with superior tensile properties

A Novel NbTaV0.5Hf0.1 Complex Concentrated Alloy with Superior Room-Temperature Tensile Plasticity and Elevated-Temperature Strength

Lightweight refractory high entropy alloys with excellent specific strength and enhanced malleability by in-situ heterogeneous structure

Enhanced Strength and Plasticity of Selective Laser Melted NbMoTaW Refractory High-Entropy Alloy Via Carbon Microalloying

Enhanced Strength and Ductility of Laser Powder Bed Fused NbMoTaW Refractory High-Entropy Alloy Via Carbon Microalloying

Enhancing the Strength and Plasticity of Laser Powder Bed Fused NbMoTaW Refractory High-Entropy Alloy Via Ti Alloying

Oxide dispersion strengthening mediated ultra-high strength at wide temperature range in NbTaTiV refractory high-entropy alloys

Microstructure and strengthening mechanisms of novel lightweight TiAlV0.5CrMo refractory high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Development and characterization of a low-density TiNbZrAlTa refractory high entropy alloy with enhanced compressive strength and plasticity

Outstanding specific yield strength of a refractory high-entropy composite at an ultrahigh temperature of 2273 K

CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy

A single-phase V0.5Nb0.5ZrTi refractory high-entropy alloy with outstanding tensile properties

Design and Coherent Strengthening of Ultra-High Strength Refractory High Entropy Alloys Based on Laser Additive Manufacturing

Tailoring microstructures and mechanical properties of lightweight refractory Ti22Sc22Zr22Nb17V17 multi-phase high-entropy alloys by hot extrusion and annealing

Uniting superior mechanical properties with oxidation resistance in a refractory high-entropy alloy via Cr and Al alloying

Superior tensile properties of a novel as-cast non-equimolar Zr45Ti15Nb20Ta20 complex concentrated alloy

Enhanced high-temperature strength of HfNbTaTiZrV refractory high-entropy alloy via Al2O3 reinforcement

Promoted high-temperature strength and room-temperature plasticity synergy by tuning dendrite segregation in NbMoTaW refractory high-entropy alloy

A lightweight refractory complex concentrated alloy with high strength and uniform ductility