Abstract:Saturated soil shear strength is a primary factor that reflects the driving resistance of agricultural machinery in paddy soils. The determination of soil shear strength indicators, such as cohesion and internal frictional angle, is crucial to improve the walking efficiency of agricultural machinery in paddy soils. However, the measurement of these indicators is often costly and time-consuming. Soil moisture content, density, and clay content are crucial factors that affect the cohesion and internal friction angle, while very limited studies have been performed to assess the interactive effects of the three factors on soil shear characteristics, especially on paddy soils. In this study, eight soil samples were taken from eight paddy fields in Southeastern China, and the central composition rotatable design was used to classify the soil samples into five levels based on different clay content (X1), moisture content (X2), and density (X3). The direct shear tests were carried out indoors on the remolded paddy soil using a self-made shear characteristic measuring device. Then, both individual and interactive effects of X1, X2, and X3 on soil cohesion and internal friction angles on paddy soils were systematically investigated and analyzed using the regression analysis method in the data processing software Design-Expert. Our results indicated that the effects of the three environmental factors on soil cohesion were in the order of X1 > X2 > X3, while the order was X2 > X3 > X1 for the impact on internal friction angle. The interactive effects were in the order of X1X2 > X1X3 > X2X3 for cohesion and X1X2 > X2X3 > X1X3 for internal friction angle. Two prediction models were successfully established to quantify the soil cohesion and internal friction angle as affected by soil physical properties, and the coefficient of determination (R2) was 0.91 and 0.89 for the two equations, respectively. The model validations using new soil samples suggested that the models were capable of predicting the shear characteristic parameters under different physical parameters effectively, with errors between predicted and measured soil shear strength indicators within 15% and relative root mean square error less than 11%.

Characteristics of Physical Parameters and Predictive Modeling of Mechanical Properties in Loess-Like Silty Clay for Engineering Geology

Influence of Clod Size and Water Content on Gas Permeability of A Compacted Loess

Analysis of Damage Constitutive Model for Frozen Red Clay under Uniaxial Compression

Estimation of Soil Shear Strength Indicators Using Soil Physical Properties of Paddy Soils in the Plastic State

Quantification of the Soil Stiffness Constants Using Physical Properties of Paddy Soils in Yangtze Delta Plain, China

Experimental Study on the Correlation Between Shear Characteristic and Physical Parameters of Paddy Soil in Plastic State

Physical and Mechanical Properties and Microstructures of Slip Soil of Loess Bedrock Contact Landslide

Machine Learning Prediction Model for Clay Electrical Conductivity and Its Application in Electroosmosis Consolidation

The geological origins and soil properties of loess-like silty clay: a case study in the jinan area

Correlation Analysis and Prediction of the Physical and Mechanical Properties of Coastal Soft Soil in the Jiangdong New District, Haikou, China

The distribution of Van Genuchten model parameters on soil-water characteristic curves in Chinese Loess Plateau and new predicting method on unsaturated permeability coefficient of loess

Characterizing anisotropic spatial variations of uncertain mechanical parameters for clay layer using incomplete probability data

Quantitative investigation and intelligent forecasting of thermal conductivity in lime-modified red clay

Novel Insights in Soil Mechanics: Integrating Experimental Investigation with Machine Learning for Unconfined Compression Parameter Prediction of Expansive Soil

Physical Modelling of Hydraulic Erosion Rates on Loess Slopes

An Elastic-Plastic Constitutive Model for Unsaturated Structural Loess

Study on triaxial test and constitutive prediction model of frozen silty clay

Influence of dry density and wetting–drying cycles on the soil–water retention curve of compacted loess: experimental data and modeling

Effects of dry density and water content on compressibility and shear strength of loess

A method for determining unsaturated strength parameters in stability analysis of loess slope

Hydraulic property variations with depth in a loess mudstone landslide