Abstract:Electrochemical sensor is a rapid and sensitive method for the detection of antibiotics in water. Biochar derived from waste biomass is a potential material for the preparation of electrochemical sensors. In this study, four kinds of biochar with different specific surface area, pore structure and chemical composition were prepared by using ZnCl2 and KOH as activators at 500 degrees C and 900 degrees C respectively, and electrochemical sensors were prepared by using them as electrode materials to detect ciprofloxacin (CIP) in water. The ZnCl2 activated materials contain a large number of mesoporous structures, while the KOH activated materials are mainly microporous. The specific surface area of the material prepared at 900 degrees C is greater than that of the material prepared at 500 degrees C. Differential pulse voltammetry results indicated the ZnBC-900 degrees C exhibited the best electrochemical detection performance for CIP. The linear range of CIP detection was 0.08-10 mu M and the LOD was 0.069 mu M. The fabricated sensor also exhibited excellent selectivity, stability and practical application. This study also indicated that the high specific surface area and mesoporous structure is more conducive to CIP detection.

Electrochemical Detection Ciprofloxacin by Waste Soybean Straw Derives Biochar: Performance and Structure-Property Relationship Study