Abstract:Contaminants stored in low-permeability soils can continue to threaten the adjacent groundwater system even after the aquifer is considered remediated. The redistribution of contaminants from low-to-high-permeability aquifer zones (Back-Diffusion) can generate a long-term plume tail, commonly considered one of the main obstacles to effective groundwater remediation. In this paper, a laboratory test was performed to reproduce the redistribution process from low-permeability silt lenses (k ≈ 1 × 10−7 m/s) to high-permeability sand aquifers (k ≈ 1 × 10−3 m/s). The target of the experimental and numerical approach was finalized to verify what influence the shape and position of the lenses could have, with respect to the bulk flow, on the time necessary to complete the depletion of the dissolved substances present in the lenses. For this purpose, an image analysis procedure was used to estimate the diffusive flux of contaminants released by these low-permeability zones in different boundary conditions. The results obtained in the laboratory test were used to calibrate a numerical model implemented to simulate the Back-Diffusion process. Once calibrated, the numerical model was used to simulate further scenarios to evaluate the influence of the location and shape of the low-permeability lenses on the time necessary to diminish its contaminant content when subjected to a steady-state flow. The numerical model was also used to investigate the effect of different groundwater velocities on the depletion time of the process. The results show that the shape and position of the lens have an important impact on the time necessary to empty the lens, and an increase in the velocity field in the bulk medium (flow rate rising from 1.6 l/h to 2.5 l/h) does not correspond to diminishing total depletion times, as the process is mainly governed by diffusive transport inside the lens. This appears to be significant when the remediation approach relies on pumping technology. Future research will verify the behavior of the released plume in a strongly heterogeneous porous medium.

Analytical Model for Reactive Contaminant Back-Diffusion from Low-Permeability Aquitards with Internal Source Zones

Investigating the roles of advection and degradation in chlorinated solvent back-diffusion from multi-layer aquitards: A novel analytical approach

An Analytical Solution for Contaminant Extraction in a Radial Flow Field Using PVD-enhanced System

A two-dimensional analytical model for organic contaminant transport in cutoff wall and aquifer system

An analytical model for contaminant transport in cut-off wall and aquifer system

Analytical Model for Transient Coupled Consolidation and Contaminant Transport in Landfill Liner System

Analytical Model for Two-Dimensional Contaminant Transport in a Cut-off Wall and Aquitard System

An Analytical Model for Contaminant Transport in Landfill Composite Liners Considering Coupled Effect of Consolidation, Diffusion, and Degradation

Analytical Model for Electrokinetic Remediation of Contaminated Soil

Analytical Model and Experiment for Electro-Kinetic Remediation of Contaminated Soil Considering Thermal Diffusion

Analytical Model of Contaminant Advection, Diffusion and Degradation in Capped Sediments and Sensitivity to Flow and Sediment Properties

A two-dimensional analytical model for organic contaminants transport in a transition layer-cutoff wall-aquifer system

Lab Investigation Using a Box Model and Image Analysis of a Contaminant Back-Diffusion Process from Low-Permeability Layers

A semi-analytical model for analyzing the transport of organic pollutants through the geomembrane composite cut-off wall and aquifer system

One-dimensional Analytical Model for Contaminant Transport Through CCL under Thermal Diffusion and Its Application

A Novel Analytical Model of Solute Transport in an Aquifer-Aquitard System with Mixing Processes in the Reservoirs

An Analytical Model for Diffusion of Chemicals under a Thermal Gradient in Finite Clayey Soil

A novel analytical model of solute transport in a layered aquifer system with mixing processes in the reservoirs

Analytical Model for the Design of Permeable Reactive Barriers Considering Solute Transport in a Dual-Domain System

New analytical models of subsurface reactive transport with transient flow field, time-dependent source concentration, and arbitrary initial condition

An Analytical Solution for One-Dimensional Contaminant Diffusion Through Multi-Layered System and Its Applications