Abstract:We report the recent progress on the conceptual design of the target station and neutron scattering spectrometers for the Chinese Spallation Neutron Source (CSNS). The CSNS target station will be constructed with three parts: tungsten targets cooled by heavy water, Be/Fe reflectors and Fe/high-density-iron-aggregate-concrete shields. There will be 3 WING moderators: water (300 K), liquid methane (100 K) and liquid hydrogen (20 K), and 18 horizontal neutron channels for neutron scattering spectrometers. The Monte Carlo simulation shows that the optimized ratio of height to width of the target cross-section is ~1:2.5. With a nuclear power of 100 kW, the pulsed neutron flux is 2.4 × 1016 cm?2·s?1 for a 40 mm× 100 mm× 10 mm × 40 target stack. The emitted heat is about 47 kJ/s, the target temperature is somewhat higher than 90°C with a normal cooling efficiency, and the strain should be lower than 0.2 mm. Initially 5 typical spectrometers are chosen to be constructed, including a high intensity powder diffractometer, a high resolution powder diffractometer, a small angle scattering spectrometer, a reflectometer and a direct geometry inelastic neutron scattering spectrometer. These spectrometers can cover more than 80 % of the neutron scattering applications.

Integrated Neutron Diffractometer at Extreme Conditions (INDEC) at China Spallation Neutron Source (CSNS)

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - Design and Performance

Physical design of an Atmospheric Neutron Irradiation Spectrometer at China Spallation Neutron Source

Application of Electronic time focusing at the Engineering Materials Diffractometer in the China Spallation Neutron Source

Neutron Beam Line Design of a White Neutron Source at CSNS

China Spallation Neutron Source: Design, R&D, and Outlook

Conceptual Design of Target Station and Neutron Scattering Spectrometers for the Chinese Spallation Neutron Source

Distributed data processing and analysis environment for neutron scattering experiments at CSNS

A New Small-Angle Neutron Scattering Spectrometer at China Mianyang Research Reactor

China spallation neutron source design∗

Development of an automatic sample changer with variable temperature for small-angle neutron scattering at China Spallation Neutron Source

China Spallation Neutron Source: Accelerator Design Iterations and R and D Status

A ceramic GEM-based neutron beam monitor for China Spallation Neutron Source

Physical Design of the Target Station and Spectrometers for a Spallation Neutron Source

Status of the Beam Instrumentation System of CSNS

Design of back-streaming white neutron beam line at CSNS

Upgrade of Xuanwu: A Dual-Mode Neutron Powder Diffractometer at CMRR

Possible Atmospheric-like Neutron Beams at CSNS

ENGIN-X – Instrument for Materials Science and Engineering Research

Design Progress of the SANS Instrument at CPHS