Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

Optimizing in-situ capture of Cl and C through HCl acidification and crystal formation in PVC-based cable pyrolysis

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

Catalytic stepwise pyrolysis for dechlorination and chemical recycling of PVC-containing mixed plastic wastes: Influence of temperature, heating rate, and catalyst

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Coupling dechlorination and catalytic pyrolysis to produce carbon nanotubes from mixed polyvinyl chloride and polyethylene

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

Study on catalytic pyrolysis and combustion characteristics of waste cable sheath with crosslinked polyethylene

Poisoning effect of polyvinyl chloride on the catalytic pyrolysis of mixed plastics over zeolites

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Characterization of solid and liquid carbonization products of polyvinyl chloride (PVC) and investigation of the PVC-derived adsorbent for the removal of organic compounds from water

Converting Polyvinyl Chloride Plastic Wastes to Carbonaceous Materials via Room-Temperature Dehalogenation for High-Performance Supercapacitor

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

TG-FTIR analysis of PVC thermal degradation and HCl removal

Preparation of carbon nanotubes by catalytic pyrolysis of dechlorinated PVC

Co-hydrothermal dechlorination of PVC plastic and bagasse: Hydrochar combustion characteristics and gas emission behavior

Investigation of the uptake and catalytic effect of calcium and potassium‐based additives under low‐temperature pyrolysis of polyvinyl chloride

Feedstock recycling of cable plastic residue via steam cracking on an industrial-scale fluidized bed

Sustainable Advance of Cl Recovery from Polyvinyl Chloride Waste Based on Experiment, Simulation, and Ex Ante Life-Cycle Assessment

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

Hydrothermal dechlorination strategy for high-quality oil recovery from polyvinyl chloride

Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons