Abstract:Numerous fluorine-containing hazardous solid wastes from the electrolytic aluminum process pose a serious threat to the ecosystem and human health. Currently, in the study of leaching on these wastes, Al and F are usually recovered by adjusting the pH of the leaching solution to precipitate aluminium hydroxyfluoride hydrate, which can be used to produce aluminum fluoride by roasting. However, aluminium hydroxyfluoride hydrate is often mingled with cryolite and other impurities when precipitating, which ultimately affects the purity of obtained aluminum fluoride by calcination. Interestingly, herein, the aluminium hydroxyfluoride hydrate residue was digested by fluorosilicic acid to effectively remove impurities and obtain a pure aluminum fluoride solution, from which the β-AlF 3 product was produced by crystallization at a high-temperature. The results show that under the conditions of a temperature of 60 °C, time of 35 min, initial fluorine-aluminum molar ratio of 3:1 and initial concentration of fluorosilicic acid of 18 %, the gross yield of fluorine is 86.2 %, and the recovery of silicon in the form of SiO 2 is 95.2 %. During crystallization, the product changes from AlF 3 ·3H 2 O to β-AlF 3 with the increase of temperature. Under the conditions of a crystallization temperature of 150 °C, an initial concentration of aluminum fluoride of 191.10 g/L and a stirring speed of 200 rpm, β-AlF 3 of an average particle size of 43.22 μm was obtained by adding 5 % seed. The contents of Al and F in β-AlF 3 products are 32.57 % and 61.49 % respectively, which meet the requirements of GB/T 4292–2017 (AF-0) about National Standards of China. According to DFT calculation, the β-AlF 3 tends to adsorb two or three water molecules in its cavity structure, which explains why the crystallized β-AlF 3 contains water of 5.10 % at 180 °C.

Review on the Preparation of Cryolite from Industry Waste Containing Fluorine

Study on the Mechanism and Process of Preparing Calcium Fluoride from Regenerated Cryolite

Study on preparation of aluminum fluoride from cryolite

Purification mechanism of fluoride-containing sludge from different sources by hydrometallurgy

Study on dissociation mechanism and process of regenerated cryolite

Recovery and removal of fluoride from fluorine industrial wastewater by crystallization process: a pilot study

Synthesis Technology of Cryolite and Its Application in the RE Smelting Process

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Efficient recovery of highly pure CaF2 from fluorine-containing wastewater using an icy lime solution

Preparation of β-AlF 3 from fluorine-containing wastes: Leaching with fluorosilicic acid and crystallization

Preparation and Characteristics of Polyaluminium Chloride by Utilizing Fluorine-Containing Waste Acidic Mother Liquid from Clay-Brine Synthetic Cryolite Process

The recycling of carbon-rich solid wastes from aluminum electrolytic cells: a review

Research progress on synthesis of zeolites from coal fly ash and environmental applications

Preparation and characterization of low-cost refractories for aluminum-melting-furnace linings from ferrotitanium slag

Preparation of aluminum fluoride from carbon residue in aluminum electrolysis cell by roasting-leaching method

Synthesis of Cryolite (Na3AlF6) from Secondary Aluminum Dross Generated in the Aluminum Recycling Process

Recycling of calcium fluoride sludge as ceramic material using low temperature sintering technology

Comprehensive treatments of aluminum dross in China: A critical review

Removal of fluoride from industrial wastewater by using different adsorbents: A review

Combing Seeding Crystallization with Flotation for Recovery of Fluorine from Wastewater: Experimental and Molecular Simulation Studies

Research on Advanced Treatment Technology of Fluorine Containing Wastewater from Graphite Production