Abstract:A hybrid electronic‐spark switch power management system is proposed to optimize the energy harvesting efficiency of Triboelectric Nanogenerators (TENGs). By controlling the activation timing of the spark switch and reducing the voltage applied to electronic components, HESS achieves a record power density of 29.8 mW Hz−1 m−2 at 1.8 kV, with a component breakdown of only 450 V. Significant efforts are devoted to optimizing the efficiency of triboelectric energy harvesting systems, particularly through the design of an advanced power management system (PMS) for Triboelectric Nanoenerators (TENGs). A critical aspect of PMS is the design and control of switches. However, existing switches face significant limitations. For spark switches, precise control cannot be achieved, and electronic switches can only operate at voltages below several hundred volts which is limited by the risk of electrical breakdown. To address these limitations, a hybrid electronic‐spark switch power management system (HESS) is proposed. HESS changes the connection of capacitors from parallel to series by deploying a maximum voltage tracking switch components at the peak voltage point, resulting in a much‐elevated voltage level to activate the spark switch. This approach achieves precise control of the spark switch for the first time and significantly reduces the operating voltage of electronic switches. Through simulation and experimental verification, HESS achieves the control at a voltage level of 1.8 kV for spark switch, with an electrical component breakdown voltage of only 450 V. The power density of the HESS is 29.8 mW Hz−1 m−2, which is a new record for electronic switches.

Suppressing the Air-Breakdown Phenomenon of Electrostatic Generator for Efficient Energy Harvesting

Ultrahigh Power Generation from Low-Frequency and Micro Motion by Suppressing Air Breakdown

A Strategy to Reduce Air Breakdown Effect and Boost Output Energy for Contact-Separation Mode Triboelectric Nanogenerator

An Optimization Approach for Contact-Separation Triboelectric Nanogenerator Harvesting Bridge Vibrations

Droplet-enabled controllable manipulation of tribo-charges from liquid-solid interface

A Compact Triboelectric Nanogenerator with Ultrahigh Output Energy Density of 177.8 J M−3 Via Retarding Air Breakdown

All-in-One High Output Rotary Electrostatic Nanogenerators Based on Charge Pumping and Voltage Multiplying

Universal Energy Management Unit for Electrostatic Generators with an Ultrahigh “efficiency” of over 100%

Universal Energy Management Unit for Electrostatic Generators with Excellent Performance

Theoretical investigation of air breakdown direct current triboelectric nanogenerator

Largely enhanced electrostatic generator based on a bipolar electret charged by patterned contact micro-discharge and optimized substrates

Boosting the Charge Density of Triboelectric Nanogenerator by Suppressing Air Breakdown and Dielectric Charge Leakage

Achieving high-efficient triboelectric nanogenerators by suppressing electrostatic breakdown effect

Improved Output Performance of Direct‐Current Triboelectric Nanogenerator through Field Enhancing Breakdown Effect

Optimization of Triboelectric Nanogenerator Load Characteristics Considering the Air Breakdown Effect

Electrostatic generator enhancements for powering IoT nodes via efficient energy management

An Electrostatic-Electromagnetic Hybrid Generator with Largely Enhanced Energy Conversion Efficiency

Achieving Ultrahigh Efficiency of Triboelectric Nanogenerator Energy Harvesting Systems via Hybrid Electronic‐Spark Power Management

Ultrahigh Electricity Generation from Low-Frequency Mechanical Energy by Efficient Energy Management

An ultra-compact lightweight electromagnetic generator enhanced with Halbach magnet array and printed triphase windings

Transient physical modeling and comprehensive optimal design of air-breakdown direct-current triboelectric nanogenerators