Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Operating Point Control Method for the Mach–Zehnder Modulator in a Phase-Shift Laser Range Finder

Linearization of Two Cascaded Intensity-Modulator-based Analog Photonic Link

Highly linear silicon Mach-Zehnder modulators with optimized phase-shifter

Silicon Dual-Series Mach-Zehnder Modulator with High Linearity

Adjustment Method for Quasi Zero Optical Path Difference of VISAR

Linearity Comparison of Silicon Carrier-Depletion-Based Single, Dual-Parallel, and Dual-Series Mach–Zehnder Modulators

Femtosecond Laser Pulse Picking Method Based on Mach–Zehnder Modulator by Keeping Phase of the Picked-Up Pulse Steady

Any bias point control of mach-zehnder electrooptic modulator and its applications in optimization of radio-over-fiber links

High-speed, low-loss silicon Mach-Zehnder modulators with doping optimization.

Influence Of Loss On Linearity Of Microring-Assisted Mach-Zehnder Modulator

Linearization of Mach-Zehnder Modulator Using Microring-Based All-Pass Filter

A high linear silicon Mach-Zehnder modulator by the dual-series architecture

Coherent Detection-Based Automatic Bias Control of Mach–Zehnder Modulators for Various Modulation Formats

Bias Controller of Mach-Zehnder Modulator for Electro-Optic Analog-to-Digital Converter

Characterization of Dual-Parallel Mach-Zender Modulator Based on Signal Level Control and Low-Frequency Detection

High Linearity Silicon Modulator Capable of Actively Compensating Input Distortion.

A Silicon Optical Single Sideband Modulator with Ultra-High Sideband Suppression Ratio

Relative Frequency Response Measurement of Mach-Zehnder Modulators Utilizing Dual-Carrier Modulation and Low-Frequency Detection.

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Modulator Bias Control Based on Bi-PID Algorithm for Optical Time and Frequency Transmission

Modulation-free Laser Stabilization Technique Using Integrated Cavity-Coupled Mach-Zehnder Interferometer