Abstract:The fast response and low inertia characteristics of converter-based generation (CBG) lead to a new stability issue that limits the development of renewable energy. The experimental tests validated in this paper confirm that although the grid-forming type converter (GFM) can improve the stability of CBG, the wideband oscillation problems are still risks within different Short-Circuit Ratio (SCR) conditions. This is due to the fact is that, there is no unified and effective way to setting the parameters in existence control strategy. The unsuitable selection of the output and input variable in linearized model of GFM converter leads to a failure of coefficients tuning which brings the instability to the system. In order to optimization parameters tuning process, a benchmark model is adopted in this paper, and the linearization model is updated by selecting suitable variables and detailed with considering the influence of resistance of the converter, etc. Based on this model, the stability margin related to the parameters of system is analyzed. Furthermore, based on this model, in order to consider more dynamics and make the converter controller focus on the topologies and scenarios which lack stabilitythemselves, the different grid scenarios are emulated to design a controller using Deep Reinforcement Learning (DRL) from offline to online to capture more dynamics. That is, the cascaded voltage and current control is tuned by Deep Deterministic Policy Gradient (DDPG) algorithm. Furthermore, the novel grid-forming control structure is proposed based on same algorithm. The validation tests indicate that the proposed strategy provides more essential for the power system stability in various grid conditions.

Power Shaping Control of Single-Phase Grid-Connected Converter Based on Brayton-Moser Model

Influence of Power Factor on Small-Signal Stability of Grid-Connected Converter Systems

H∞-Control of Grid-Connected Converters: Design, Objectives and Decentralized Stability Certificates

Large-disturbance Stability for Power-Converter-dominated Microgrid: A Review

Hybrid Frequency-Domain Modeling and Stability Analysis for Power Systems with Grid-Following and Grid-Forming Converters

State-Space Modeling of Grid-Connected Power Converters Considering Power-Internal Voltage Characteristics

Dynamic Grid Voltage-Based Impedance-Reshaped Control for the Stability Enhancement of Grid-Connected DC/AC Converter System under Bidirectional Power Flow

Stability Analysis of Grid-Connected Converter Based on Interconnected System Impedance Modeling under Unbalanced Grid Conditions

Analysis and Benchmarking of Grid-Forming Control for Power Converters

Study of Stability Analysis and Design Method for Grid-Connected Converter Connected to Three-Phase Voltage Source Converter

Modeling and Stability Analysis for Grid-Forming Converter in a Renewable Energy Generation System

Improved Control of the Grid-Connected Converter under the Harmonically Distorted Grid Voltage Conditions

Large-Signal Stability Criteria in DC Power Grids With Distributed-Controlled Converters and Constant Power Loads

Large-Signal Stability of Grid-Forming and Grid-Following Controls in Voltage Source Converter: A Comparative Study

Analysis of the Stability and System Participation Factors of Grid-Connected Converters

Transient Synchronous Stability Analysis of Grid-Following Converter Considering Outer-Loop Control with Current Limiting

Stability Analysis of PLL-Type Grid-Connected Converter Based on The Perturbation Method

Impedance Modeling and Stability Mechanism Analysis for Grid Forming and Grid Following Converters

DC‐side Stability Analysis of Grid‐tied Converter with Different Control Modes Based on Electrical Torque Analysis

Impedance Shaping of Grid-Connected Converter Based on Gershgorin Disc Theorem and Return Ratio Matrix

Analysis of Stability Stationary Point for Virtual Parameters of Grid-forming Converter Integrated Power Systems Based on Small-signal Model