Abstract:In order to improve the wear and corrosion resistance of Ti-6Al-4V, a novel beta-Ta2O5 nanoceramic coating was synthesised using reactive sputter deposition enabled by double glow discharge plasma technique. The surface topography, chemical composition, and microstructure of the newly developed coating were characterised by a variety of surface analytical techniques. The coating microstructure was found to exhibit a compact striated pattern extending in a direction perpendicular to coating surface, which is composed of equiaxed beta-Ta2O5 grains with an average grain size of similar to 20 nm, well adhered to the Ti-6A1-4V substrate. The hardness and the Young's modulus of the as-deposited coating were obtained by nanoindentation, and the adhesion strength between the coating and substrate was determined by a scratch tester. The dry sliding wear behaviours of the coating were investigated at room temperature against Si3N4 ceramic balls at room temperature under applied loads ranging from 2.3 N to 5.3 N using a ball-on-disc tribometer. The specific wear rates of the coating exhibited only a slight increase with applied normal load, and were shown to be two orders of magnitude lower than that for Ti-6Al-4V under the same loading condition. Furthermore, the electrochemical behaviour of the coating immersed in 3.5 wt.% NaCl solution was systematically examined by using a range of complementary electrochemical techniques including potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS), MottSchottky analysis as well as potential of zero charge (PZC). The results showed that the corrosion resistance of the beta-Ta2O5 nanoceramic coating was better than that of Ti-6Al-4V alloy in 3.5 wt.% NaCl solution. Hence, by possessing higher mechanical properties and good wear and corrosion resistance, the beta-Ta2O5 nanoceramic coating is considered to be a promising candidate for protection of engineering components operating under harsh conditions. (C) 2016 Elsevier B.V. All rights reserved.

Theoretical Screening of Transition Metal Alloys with High Corrosion Resistance: the Case of Ta-Based Alloys As an Example

The Corrosion Behavior of TA1 and TC4 in Proton Exchange Membrane Water Electrolyzers

An in-depth understanding of the solvation effect of methanol on the anisotropy of electrochemical corrosion of Ta

Corrosion behavior of metallic coatings on titanium bipolar plates of proton exchange membrane water electrolysis

A First-Principles-Based Approach to The High-Throughput Screening of Corrosion-Resistant High Entropy Alloys

Corrosion Resistance of Nb and NbTi Alloy Predicted by Hydrogen Evolution Reaction Models Modified with Langmuir Isotherm Adsorption Theory

Self-adaption Ta/TaC multilayer coating with fine grains: toward excellent corrosion resistance in aggressive environment

Balancing the corrosion resistance and conductivity of Cr-Al-C coatings via annealing treatment for metal bipolar plates

Corrosion Resistance and Conductivity of Ta-Nb-N-Coated 316L Stainless Steel as Bipolar Plates for Proton Exchange Membrane Fuel Cells

Corrosion and passivation behavior of in-situ TiC reinforced Al 0.1 CrNbSi 0.1 TaTiV refractory high entropy alloy coatings via doping C

Electrochemical properties and surface conductivity of Ti-Al coating on Ti-6Al-4V

Corrosion resistance investigation of the Ti–Al–Mo system supported by CALPHAD approach and key experiments

Corrosion and Wear Behaviours of a Reactive-Sputter-deposited Ta2O5 Nanoceramic Coating

Investigation of the effect of the TaC/α-C coating process on the properties of stainless steel bipolar plates

Strategy of Alternating Bias Voltage on Corrosion Resistance and Interfacial Conductivity Enhancement of TiCx/a-C Coatings on Metallic Bipolar Plates in PEMFCs

Quantitative Prediction of Corrosion Resistance in Ferrous Alloys: A First-Principles Study of Coupled Doping of Alloying Elements

Corrosion Resistance and Passivation Behavior of CoCrFeNi-TiAl High-Entropy Alloy Coatings in Acidic Solutions

Seawater Corrosion Resistant and Isotropic Zero Thermal Expansion (Zr, Ta)(Fe, Co)2 Alloy

Corrosion resistance and conductivity of amorphous carbon coated SS316L and TA2 bipolar plates in proton-exchange membrane fuel cells

Corrosion-resistant and interfacial conductive AlTiVCrMo high-entropy alloy and (AlTiVCrMo)Nx high-entropy ceramics coatings for surface modification of bipolar plates in proton exchange membrane fuel cells

Performance of Ta/TaN Coated Titanium Felt for Proton Exchange Membrane Water Electrolysis