Abstract:Zirconium alloys are commonly used as a cladding material for fuel elements in nuclear reactors. This application is connected with zirconium alloy's good resistance to water corrosion and radiation resistance under normal working conditions. In the case of severe accident conditions, the possibly very fast oxidation of zirconium alloys in steam or/and air atmosphere may result in the intense generation of hydrogen and explosion of the hydrogen oxide mixture. The development of a solution to minimize the aforementioned risk is of interest. One of the actual concepts is to improve the oxidation resistance of Zr alloy cladding with protective coatings. This study aimed to develop, form, and investigate new coatings for zirconium alloy Zry-2. Multi-elemental Physical Vapour Deposition (PVD) coatings with Cr, Si, and Zr were considered for Institute of Nuclear Chemistry and Technology) INCT as corrosion protective coatings for nuclear fuel claddings. Heat treatment at 850–1100 °C/argon, air oxidation processes at 700 °C/1–5 h, and a long-term corrosion test in standard conditions for Pressure Water Reactor (PWR) reactors (360 °C/195 bar/water simulating the water used in PWR) were carried out. Initial, modified, and oxidized materials were characterized with Scanning Electron Microscopy (SEM) (morphology observations), Energy Dispersive Spectroscopy (EDS) (elemental composition determination), and X-ray Diffraction (XRD) (phase composition analysis). Slower oxidation processes and a smaller oxidation rate, in the case of modified material investigations, were observed, as compared with the unmodified material. The obtained results displayed a protective character against the oxidation of formed layers in the defined range of parameters in the process.

Recent Advances in Joining of Zirconium and Zirconium Alloy for Nuclear Industry

Diffusion bonding, brazing and resistance welding of zirconium alloys: a review

Investigating Zirconium Alloy Corrosion with Advanced Experimental Techniques: A Review

Review on the Preparation and High-Temperature Oxidation Resistance of Metal Coating for Fuel Cladding Zirconium Alloys

Research progress of novel zirconium alloys with high strength and toughness

A detailed study on zirconium and its applications in manufacturing process with combinations of other metals, oxides and alloys – A review

Review on chromium coated zirconium alloy accident tolerant fuel cladding

Microstructural and mechanical property evolution of a nuclear zirconium-4 alloy fabricated via laser powder bed fusion and annealing heat treatment

Microstructure and high-temperature oxidation behaviour of anti-oxidation coating on zirconium alloys: An overview

Low-temperature direct diffusion bonding of Zr702 alloys via electric current assistance

Enhancing the oxidation behaviors of Zr alloys for nuclear fuel cladding using nanolamellar Cr/CrN coating

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

A novel nano-structured zirconium alloy prospective for high temperature applications

Improvement and prediction technology of the water-side corrosion of zirconium alloy: the developmental tendency

Electron beam weldability of TiZrNbTa refractory high-entropy alloy and TC4 titanium alloy

The development and applications of zirconium alloys

Application and Development Progress of Cr-Based Surface Coatings in Nuclear Fuel Element: I. Selection, Preparation, and Characteristics of Coating Materials

Numerical modeling of pressure resistance welding of zirconium alloy tube-end plug joint

Corrosion of Zirconium Alloys Used for Nuclear Fuel Cladding

Multi-Elemental Coatings on Zirconium Alloy for Corrosion Resistance Improvement

A review of linear friction welding of Ni-based superalloys