Abstract:Graphical abstract A new method for noncontact monitoring of thin hydrate layers was proposed by using a microwave cavity resonator as the sensor. Both numerical simulation and experimental study have been developed to verify the detection capability, and the experiment results matched the simulation well. The high sensitivity of the designed resonating type sensor provides the ability to evaluate the hydrate layer thickness, and the resolution on thickness interval of 2 mm has been verified experimentally. This is helpful for hydrate detection in the early stage of generation. The other critical advantage of the method is monitoring the ability of phase composition of the detected layer if the thickness is a known parameter. Exactly for thin hydrate layer monitoring, the phase change process during the hydrate dissociation can be evaluated. It can provide real‐time and in situ blocking monitoring in gas transportation with the pipeline, for example, estimating the application effect of hydrate inhibitor. In oil/gas production and transportation systems, the formation of gas hydrates needs to be properly managed as they can potentially lead to plugging. Monitoring the thin hydrate layers during the initial formation stage is thus significantly critical for preventing such a risk. Noncontact monitoring of the thin hydrate layer with an open‐ended microwave cavity resonator is presented in this study. The measuring mechanism of the proposed method was studied with numerical simulation, and the measurement ranges with two typical modes TM010/TM021s were experimentally investigated. The resonance frequency of the TM010 mode is applicable for measuring the thickness of hydrates within 20 mm, while the TM021 mode is only suitable for 8 mm. Then, formation/dissociation experiments of thin hydrate layers were conducted by using tetrahydrofuran to form the hydrate. Both simulation and experimental results showed that the resonant frequency can provide a sensitive response to the dielectric properties and layer thickness. Then the relationship between the resonant frequency and the fractions of solution/hydrate in the mixed layers was determined, and it was further optimized according to the simulation and experimental results. In addition, hydrate layer melting experiments were conducted with different layer thicknesses, and the volumetric fraction of the hydrate can be calculated with fixed layer thickness, thus the phase change during the hydrate melting process was precisely monitored with a time step of 1 min.

Noncontact monitoring of thin hydrate layers with microwave cavity resonator

Pore-Scale Characterization and Mass-Transfer Mechanism of Crystal Hydrate Gowth by Using 2.5D Microchip Observation

Non-Embedded Ultrasonic Detection for Pressure Cores of Natural Methane Hydrate-Bearing Sediments

Multi-scale Characterization of Shell Thickness and Effective Volume Fraction During Gas Hydrates Formation: A Kinetic Study

In-situ observation for natural gas hydrate in porous medium: Water performance and formation characteristic

A Hydrate Blockage Detection Apparatus for Gas Pipeline Using Ultrasonic Focused Transducer and Its Application on a Flow Loop

Three-Scale in Situ Investigation on the Film Morphology and Mass Transfer Channels During the Thickening Growth of Hydrates on Gas Bubble

Direct Measurement of Pore Gas Pressure and Water/gas Phase Transitions During Methane Hydrate Dissociation

Experimental Investigation into Three-Dimensional Spatial Distribution of the Fracture-Filling Hydrate by Electrical Property of Hydrate-Bearing Sediments

Wave Propagation Characteristics in Gas Hydrate-Bearing Sediments and Estimation of Hydrate Saturation

Kinetic Process of Upward Gas Hydrate Growth and Water Migration on the Solid Surface

In situ observations by magnetic resonance imaging for formation and dissociation of tetrahydrofuran hydrate in porous media.

Study on the characteristic spectral bands of water molecule and hydrogen bond of methane hydrate

Dynamic responses of THF hydrate-bearing sediments under small strain: Resonance column test

Permeability of Laboratory-Formed Porous Media Containing Methane Hydrate: Observations Using X-ray Computed Tomography and Simulations with Pore Network Models

Quantitative Determination of Pore‐structure Change and Permeability Estimation under Hydrate Phase Transition by NMR

The Feasibility of CSEM Monitoring in Gas Hydrate Production of the Range of Porosity and Saturation

Modeling and characterizing the thermal and kinetic behavior of methane hydrate dissociation in sandy porous media

Monitoring Gas Hydrate Formation with Magnetic Resonance Imaging in a Metallic Core Holder

Thermal conductivity measurement of hydrate based on TDTR technology

Situ study of thermal conductivity of tetrahydrofuran-hydrate-bearing sediments during dissociation process