Cavitation Instability in Real-Size Gdi Nozzle Using X-Ray Phase-Contrast Imaging

Pengfei Leng,Zhijun Wu,Chaoqun Hu,Guanyu Zhang,Longbiao Hu,Jun Deng,Liguang Li,Ke Li,Weidi Huang,Tao Mo,Junyun Pan

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2024.126137

IF: 5.2

2024-01-01

International Journal of Heat and Mass Transfer

Abstract:The cavitation phenomenon induced by structural mutation has significant influence on spray characteristics in gasoline direct injection (GDI) nozzles. The spray behavior in real-size GDI injectors exhibits temporal instability, which is potentially due to cavitation instability. However, the instability of cavitation has not been studied due to the inherent challenges associated with its capture and quantification. In this study, the needle position and the nozzle cavitation in a real-size GDI injector were simultaneously captured using the X-ray phase-contrast imaging (XPCI) technique. The cavitation instability was analyzed considering both temporal and spatial dimensions. A comparison was performed to assess the cavitation instability during the quasi-steady stage for various needle heights and different injection pressures. The main findings of this work are that the cavitation instability exhibits no discernible regularity in time, even when the needle valve remains stationary. An increase in the magnitude of absolute cavitation instability was observed along the nozzle hole axis. The cavitation instability tends to be more pronounced at low injection pressures or low needle lifts. When the needle lift is 45 mu m, the variation coefficient of the cavitation area reaches 10%, which is twice as high as that observed at higher needle lifts. The presence of the needle valve is identified as the primary inducer of cavitation instability. This paper establishes an analytical method for cavitation instability and provides a theoretical basis for the control of cavitation instability.